What is FluidSIM used for?

FluidSIM® 5 is a comprehensive software for the creation, simulation, instruction and study of electropneumatic, electrohydraulic, digital and electronic circuits. All of the programme functions interact smoothly, combining different media forms and sources of knowledge in an easily accessible fashion.

What is a pneumatic relay?

Pneumatic relays and volume boosters are commonly used to switch air signals from one source to another, supplying pressure to or exhausting pressure from a particular line or control device, and providing initiation of a control function. They can also be used as an interface between pneumatic and electric circuits.

How do you run a FluidSIM?

1. Step 1: Open FluidSim.
2. Step 2: Create a NEW Project.
3. Step 3: Select the Materials to be used.
4. Step 3: Configure and connect.
5. Step 4: Configure air supply and exhaust point.
6. Step 5: Configure distance ruler and limit switch.
7. Step 5: Simulation at 100% flow.
8. Step 6: #Simulation at 50% #flow, 50% retraction.

How do you write text in FluidSIM?

Double click on the text component or click under Edit- Properties… to open the dialog box for entering new text. Description of the dialog box: Text In this field the text to be displayed is entered. A new line is entered by holding down the Ctrl-key while hitting the Return key.

Is Festo FluidSIM free?

Therefore Festo Didactic offers FluidSIM® MecLab as a free homeschooling version for a limited time. FluidSIM® can be used to address important fluid engineering topics: Components. basic circuits in pneumatics.

What is Festo FluidSIM?

FluidSIM 6 is a comprehensive software for the creation, simulation, instruction and study of electro-pneumatic, electro-hydraulic, digital and electronic circuits. All of the program functions interact smoothly, combining different media forms and sources of knowledge in an easily accessible fashion.

What is a pneumatic valve?

In the first context, a pneumatic valve is a device that is used to control or modulate the flow of air (or another inert gas) in a pneumatic system. They do so by controlling the air or gas at the source, regulating its passage as needed into tubing, pipes, or devices in an automated pneumatic system.

What is booster relay?

Booster relays (From SMC), sometimes called as volume boosters are pneumatic devices designed to reproduce a pneumatic pressure signal (1:1 ratio), but with far greater output flow capacity. Volume boosters are typically increase volume / flow of instrument air supply for faster control valve operation.

What is Festo FluidSim?

How does a pneumatic circuit work?

A pneumatic circuit is an interconnected set of components that convert compressed gas (usually air) into mechanical work. In the normal sense of the term, the circuit must include a compressor or compressor-fed tank.

What is Festo FluidSim software?

Advertisement. FluidSIM is a comprehensive software for the creation, simulation, instruction and study of electropneumatic, electrohydraulic and digital circuits. You’ll be able to create circuits easily by using drag&drop.

What is electro pneumatic circuit?

Pneumatic circuits can be controlled by electric circuits. The interface between these two circuits is a solenoid valve. Solenoid valves perform the same function as normal pneumatic valves but there are operated electrically. The movement of the armature operates the valve. …

Where can I get a copy of fluidsim?

The circuit layouts from the learning material of the following laboratory-trainings are included in FluidSIM: Your browser does not support the HTML5 video tag. FluidSIM is distributed worldwide by Festo Didactic SE. The link will take you to the corresponding Festo pages.

How are virtual measuring devices used in fluidsim?

The virtual measuring devices can be easily accessed via the diagnosis toolbar. In the toolbar the most important measurement variables – voltage, amperage, pressure and pressure flow – are pre-defined and can be used directly. Your browser does not support the video tag. FluidSIM offers a novel diagnosis concept.

How does the fluidsim actuator start and stop?

Fluidsim Actuator A+B+A-B- “Start and Stop” System – YouTube A + B+ A- B- A + B+ A- B- AboutPressCopyrightContact usCreatorsAdvertiseDevelopersTermsPrivacyPolicy & SafetyHow YouTube worksTest new features

What can fluidsim 6 do for electrical engineering?

As an extension to the already existing version for electrical engineering, FluidSIM 6 offers additional functionalities and content tailored to suit the automotive sector: In addition to real-life measuring devices that can be built into a circuit before the simulation, FluidSIM offers virtual measuring devices.