How do you install a tub surround to studs?

Instructions

1. Prepare the Walls. Unless the studs are already exposed, installation starts by stripping the walls down to the studs around where the surround will sit.
2. Install the Back Wall Panel.
3. Install the Side Wall Panel(s)
4. Prepare the Front Wall Panel.
5. Install the Front Wall Panel.
6. Complete the Installation.

Can you cut Vikrell material?

try www.sterlingplumbing.com the Vikrell series has a surround that can be cut and they have a window trim kit for it.

Can I install a bathtub myself?

Upgrading your bathtub can drastically improve your bathroom’s appearance and your family’s comfort. Removing a bathtub and installing a new one is an approachable task for many. If you carefully prepare and work with a helper, you can complete this DIY project in one day.

Who can install a bathtub?

Yes, among other services, plumbers do install and replace bathtubs. In addition to removing and installing your new bathtub, they will also connect the plumbing associated with the bathtub as well.

What do you put behind a tub surround?

Install cement board or an equivalent moisture-resistant backing material on walls behind tub and shower enclosures composed of tile or panel assemblies with caulked joints. Don’t use paper-faced backer board, i.e., paper-faced drywall, behind seamed tub and shower enclosures.

Should I put drywall behind tub surround?

Fiberglass and acrylic tub and shower enclosures come with a flanged edge that attaches directly to the wall studs, and the proper way to hide this flange is to install drywall over it.

How long does it take for mortar to dry under a bathtub?

Place another layer of plastic on top of the cement layer to protect the underside of the tub if you want to remove it later. Place the tub into the frame and onto the mortar. Fill the tub to the rim with water and let it sit for at least 72 hours full of water until the concrete dries.

Do you put flooring under bathtub?

In new construction, the tub is often installed before the walls, so there is no finished floor underneath! Installing the tub after the floor means also that they have to be more careful in not messing up the soft vinal – scratches, gouges, etc.

How do you change faucet in bathtub?

Position the new washer where the old washer previously was and re-tighten it to the valve assembly with a screw. Replace the valve assembly by turning it clockwise and re-tighten it to the fixture with the pipe wrench. Screw the faucet handle back onto the valve assembly and replace the decorative cap.

Who makes Sterling tubs?

Sterling Plumbing is the brand-name of a line of plumbing products manufactured by Kohler Co. The company designs and manufactures a diverse selection of product for the bath, including whirlpool tubs, sinks, toilets, shower doors and bathroom accessories.

What is Sterling tub?

The Sterling All Pro Bathtub is a classic white bathtub that is perfect for both modern and traditional homes. It’s 60 by 30 inches which leaves plenty of room for you to lie back and relax with no cramped feel. The design is fairly basic, but still stylish in a classic way. The Sterling All Pro Bathtub…

What is a tub faucet?

A roman tub faucet is one that often sits on the flat deck adjacent to a large soaking tub. Many people have standard bathtubs and the faucet and filler spout are on the wall just above the tub drain.