Is Sudbury transmitter down?

This transmitter has no current reported problems The BBC and Digital UK report there are no faults or engineering work on the Sudbury (Suffolk, England) transmitter.

Why is there no TV signal?

First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven’t already. If your “No Signal” message is not due to incorrect Source or Input being selected, then it’s most likely caused by a set up or antenna fault.

How do I find out where my TV transmitter is?

To find out which transmitter your aerial gets its signals from, visit our Detailed Transmitter Information page and enter your postcode and house name or number. From here you can see your most likely and alternative transmitters, predicted receptions and distance from your home address.

Where is Sudbury TV transmitter?

The Sudbury transmitter is located at Workhouse Green, near the village of Bures, which is approximately four miles south-east of Sudbury town centre. The approximate coverage of the Sudbury transmitter is just under one and a half million people, which is equivalent to some 440,000 homes.

Is there a problem with bilsdale transmitter?

What’s happened at Bilsdale transmitter? A fire at the transmitter site has caused disruption to all services from the site. The process to restore services using a combination of temporary structures and existing infrastructure elsewhere in the region has started.

What is a good TV signal strength?

A good signal is considered to be: 50%+ Signal Strength. 100% Signal Quality.

How do I fix no signal detected?

1. Turn off your computer.
2. Unplug the cable running from your monitor to your PC and plug it back in, making sure the connection is firm.
3. Reattach the cable running from your monitor to your PC.
4. Replace your monitor with another monitor if possible.
5. Open your PC case and locate your video card.

How do I check my Freeview signal strength?

Your location will determine where you get your TV signal from, and the channel line-up in your area. To check your Freeview coverage and available channels, just enter your postcode in our Freeview Channel Checker. When you set up your device, you’ll be asked to select your TV region.

How can I check Freeview in my area?

To check your Freeview coverage and available channels, just enter your postcode in our Freeview Channel Checker. When you set up your device, you’ll be asked to select your TV region. This will help to determine what regional programming you’ll receive (for example, the regional news services on BBC One and ITV).

Where is the Tacolneston transmitter?

Norfolk
The Tacolneston transmitting station is a facility for both analogue and digital VHF/FM radio and UHF television transmission near Tacolneston, 11 miles (18 km) south-west of Norwich, Norfolk, England.

What to do if your Sky Box has no signal?

Which Sky box are you having a problem with? If you’re getting a No Satellite Signal, No Signal, or No input on-screen message on your Sky+ or Sky Q box, or if your picture is freezing when watching live TV, this troubleshooting guide will help get you back up and running again.

How can I tell if my Sky Box is in standby mode?

As you do so, a red light will appear indicating that the box is in standby mode. Let the box remain in the standby mode for about 5 minutes and then switch on the television and press Sky on the remote. The digital box light should turn green and your Sky welcome channel should appear.

Why is there no signal from Sky Digibox?

Check Coaxial Cable Feeders – The coaxial cable feeder to your Sky Digibox or twin feeders to your Sky+ HD box can suffer accidental damage or even be deliberately cut by an act of vandalism.

Why does Sky TV say no satellite signal is being received?

Other indications of Sky LNB problems are picture breaking up or pixilation issues on one or more channels in the run-up to the ‘no satellite signal is being received message’ being displayed. Quad LNB’s are cheap, so replace it if you suspect a fault and check minidish alignment with satellite alignment meter at the same time.