What are some glazing techniques?

Typically, there are nine ways to apply glazes. These include dipping, dripping or pouring, brushing, spraying, splattering, stippling, sponging, glaze trailing, and glazing with wax resist.

What are the 4 main glaze types?

Basically, there are four principal kinds of glazes: feldspathic, lead, tin, and salt. (Modern technology has produced new glazes that fall into none of these categories while remaining a type of glass.) Feldspathic, lead, and salt glazes are transparent; tin glaze is an opaque white.

What are the 6 types of glazes?

Transparent, Opaque, Gloss, Matte, Breaking, Flowing, and then there are the limitless color names added to these descriptive surface names. So a very descriptive name of a glaze could be Glossy Opaque Canary Yellow cone 05. The cone describing it’s firing range.

How many layers of glaze should you apply?

Typically, three coats are applied. Each dries slowly, hardening as it does so (the glazes contain binders).

What should you always do with Bisqueware to prepare it for glazing?

Remove all dust before glazing including bisque dust, studio dust and even household or street dust. Use an air compressor for foolproof results, but work outside or in a well-ventilated area away from your primary workspace, as bisque dust is extremely abrasive to your lungs.

What happens if you put glaze unfired clay?

One of the risks of raw glazing is that the glaze can flake off the unfired pot. It can flake off bone dry and leather hard clay. However, there is a higher chance that the glaze will crack and flake off leather hard clay. The reason for this is that leather hard clay is still shrinking.

What happens to glaze in the kiln?

Glaze Firing For earthenware, such as fired clay pottery, to hold liquid, it needs a glaze. It must not touch other pots or the glazes will melt together, fusing the pots permanently. The kiln is heated slowly to the proper temperature to bring the clay and glazes to maturity, then it is slowly cooled again.

Can you layer glaze on top of glaze?

Glazes in combination can form what is called a “eutectic,” which is two or more materials that, when combined, have a lower melting point than any of them individually. Until you get to know the combination well, keep the second layer of glaze no more than one-third of the way down from the top of the pot.

Can you glaze on top of glaze?

You can layer glazes either to create a pattern on top or to get better coverage. Whichever method you choose to do, make sure you let the layer below dry before applying the new layer.

Should you wet Bisqueware before glazing?

Use a damp sponge to clean off bisqueware before glazing. For two different glaze coats, let the first coat get mostly dry (dry to the touch, but not ‘bone dry’) then add the next coat. Glaze shrinks when it dries (just like dried mud).