When did Craftsman stop making radial arm saws?

The Craftsman® 8¼-inch saws were sold from 1990 through 1995. Craftsman® 12-inch saws are not eligible for this recall. Historically, these eligible saws were sold without a guard that covers the entire blade.

Where do I find the model number on a Craftsman radial arm saw?

The recalled Craftsman® 8-, 8?-, 9- and 10-inch radial arm saws have a model number beginning with 113, usually located on the base of the saw. The brand name “Craftsman®” and store name “Sears” are written on the saws.

Are radial arm saws obsolete?

If they are used in any other way, no.” Ellis Walentine “In my mind, radial arm saws are not at all obsolete. Although sliding compound miter saws do an excellent job of finish-crosscutting boards up to 12” wide, nothing beats a radial arm saw for crosscutting wider stock and rough boards.

Who made the Craftsman radial arm saw?

Raymond DeWalt
Invented by Raymond DeWalt in 1922, the radial arm saw was the primary tool used for cutting long pieces of stock to length until the introduction of the power miter saw in the 1970s.

Does anyone still use radial arm saws?

Once the centerpiece of many thousands of home workshops, the radial-arm saw has seen its influence steadily shrink as ever more capable tablesaws and compound miter saws take over. There is but a single U.S. company still making the radial arm saw: the Original Saw Co. of Britt, Iowa.

What’s better a radial arm saw or a table saw?

The design and function of both types of saw is to cut wood, but a table saw’s design makes it ideal for ripping, or cutting a piece of wood lengthwise along the grain, while a radial arm saw is better suited for crosscutting, or cutting across the width of the wood.

What is a radial-arm saw good for?

The radial-arm saw is the perfect tool for cross-cutting dadoes and rabbets, particularly when making tenons or slots for shelf standards. Raise the blade away from the table and install your stacked dado set to the thickness desired, making certain to install it in the proper direction for the rotation of the blade.

What is an electronic radial-arm saw?

The radial-arm saw is a versatile saw that can do a lot of things in your workshop. It’s unsurpassed at accurate, easy cutoff work (no doubt that’s the reason it’s sometimes referred to as a cutoff saw). They say it can sand and plane and, like the table saw, rip long boards at a single pass.

Is a radial-arm saw worth having?

In terms of versatility, a radial arm saw wins hands down. The versatility and the number of cuts that a solid RAS can make far surpass the amount that a miter saw can make. They can also cut a wider piece of stock compared to regular miter saws.

Are radial arm saws any good?

The radial-arm saw contingent argue that their favored tool is much more versatile than the table saw. It’s unsurpassed at accurate, easy cutoff work (no doubt that’s the reason it’s sometimes referred to as a cutoff saw). They say it can sand and plane and, like the table saw, rip long boards at a single pass.

Does anyone still use radial arm saw?

Is a radial arm saw worth having?

Is a radial arm saw safe?

Radial arm saws are safer with a blade with a very low or negative hook angle, to inhibit overly fast feed rate, binding, and the blade’s tendency to try to “climb” the material. Also, a 10 deg. positive hook blade with a “triple chip profile” works well on the radial arm saw and can be considered a universal blade.

How do you set up a craftsman radial arm saw?

Adjust the Radial Arm so the Blade Travels Perpendicular to the Fence. Place a good carpenter square against the fence. Lower the blade so just one tooth barely touches the square. Adjust the arm so the blade travels square to the fence.

What is a radial arm saw used for?

Radial Arm Saw. A radial arm saw is a cutting machine consisting of a circular saw mounted on a sliding horizontal arm. Invented by Raymond DeWalt in 1922, the radial arm saw was the primary tool used for cutting long pieces of stock to length until the introduction of the power miter saw in the 1970s.

What are radial saws?

Radial saws are circular saws that cut downward, either with or against the wood grain (rip or crosscut). Radial saws have features that make them more versatile than table saws. The saw arm can be raised and lowered and swung from side to side to adjust the depth and horizontal angle of the cut.