Does GE still make Spacemaker microwave?

If you have a GE Spacemaker microwave, you might be disappointed to discover that GE has discontinued the Spacemaker line. There is no longer a need to distinguish this type of microwave since over the range models have become so common, so it has been absorbed back into GE’s main product lines.

What is the size of a GE Spacemaker microwave?

WEIGHTS & DIMENSIONS

Who makes Spacemaker microwave?

GE – Profile Series 1.7 Cu. Ft. Over-the-Range Microwave with Sensor Cooking – Stainless Steel.

How do I reset my GE Spacemaker microwave?

Locate the “Clear/Off” button on the front of the microwave. Hold it down for 3 to 5 seconds until the “LOC” error on the display disappears, or the timer or cooking time on the display resets.

Where is the filter on a GE microwave?

The charcoal filter sits loosely in the filter compartment area behind the vent cover….Over-the-Range Microwave – Charcoal Filter Replacement

1. When the filter is filled with cooking grease.
2. If upon using the vent system, there are odors detected which are different from the foods being cooked.

How do you remove a GE Profile Spacemaker microwave?

Work with your assistant to slowly lower the front of the microwave until it is at a 45-degree angle. Then, gently lift the microwave off the rear brackets. Pull the electric cord through the hole in the cabinet and remove the microwave.

Are there any recalls on GE microwaves?

BOSTON (Reuters) – General Electric Co is recalling 92,000 microwave ovens because they pose a fire hazard, the U.S. Consumer Product Safety Commission said on Wednesday.

How do you remove an old GE Spacemaker microwave?

What does F3 mean on my GE Spacemaker microwave?

The F3 means you have a shorting membrane keypad. If and when an oven exhibits this code or is coming on or doing anything by itself, this is very dangerous and can result in a fire.

Is there a reset button on GE microwaves?

Press the “Off/Clear’ button to cancel anything on the display, and reset the microwave. This is a soft reset and will simply get you out of any program you have started.

What causes a microwave to suddenly stop working?

The most common cause for a microwave oven not working at all is a blown main fuse. The microwave main fuse will cut the flow of electricity if too much current passes through it. There can also be thermal fuses, cavity fuses, and thermoprotectors which will interrupt the electrical flow if the microwave overheats.

What is reset filter on GE microwave?

The Reset Filter indicator light will reset and go off. The Reset Filter indicator does not detect when the charcoal filter is dirty. This is simply a timed function to remind you to change the filter. The Reset Filter reminder will light up every 6 months.