What is the best 90 hp outboard?
What is the best 90 hp outboard?
The all-new Yamaha 90-horsepower In-Line Four V MAX SHO® may be the smallest in the V MAX SHO® line, but it packs the biggest punch of any 90-horse on the water. Its SOHC four-valve-per-cylinder design minimizes weight while optimizing combustion.
How much do Suzuki outboards weigh?
OUTBOARD MOTORS
| OUTBOARD MOTORS | HP | Dry Weight (lbs) |
|---|---|---|
| DF9.9BS2 | 9.9 | 97 |
| DF15AEL2 | 15 | 108 |
| DF15AES2 | 15 | 105 |
| DF15ATHL2 | 15 | 122 |
What horsepower Do Suzuki outboards come in?
Suzuki is bringing a new level of excitement to the water with its new SS-Series 4-stroke outboards. 115, 150 and 250 horsepower models all take advantage of Suzuki’s “Big Block” displacement, offset driveshaft layout with two-stage gear reduction, and multi-point sequential electronic fuel injection.
How fast is a 90 hp Mercury outboard?
Re: Top Speed 1989 Montauk Mercury 90-HP This is simple math: 26.7-MPH.
How much does a Mercury 90 horsepower cost?
Average rigging costs for 225 hp. to 400 hp. is $4000. This can vary both up and down in cost depending on the pontoon and the exact engine….Mercury Motors.
| New Mercury Motor | Price |
|---|---|
| 90 ELPT | $10,599 |
| 90 ELPT CT | $10,999 |
| 115 ELPT | $11,599 |
| 115ELPT CT | $11,899 |
How fast is a 90 hp outboard?
Some 90-hp engines in 18′ aluminum boats with two people aboard will perform almost as well at cruise and have a WOT in the low 40s. 16′ aluminum boats are popular and a 60-hp engine will typically propel them from 25 mph to 30 mph top speed, depending on load.
How fast is a 90 hp Yamaha outboard?
With the Yamaha F90 fitted to a 5.35m Bar Crusher we saw a top speed of 61km/h (33 knots) at 5700rpm with a fuel burn of 35.85 litres per hour while a more modest cruising speed of 33 km/h (18 knots) at 3500rpm delivered 10.85L/ hour offering a decent range from a 100-litre tank.
How much fuel does a 200 hp outboard use?
| Select Yamaha Outboard Test Model | Stroke | Fuel consumption WOT |
|---|---|---|
| Yamaha 175 A HP | 4 stroke | 16.3 GPH |
| Yamaha 200 HP VMAX V6 | 4 stroke | 19.2 GPH |
| Yamaha 225 HP V6 | 4 stroke | 17.7 GPH |
| Yamaha 250 HP V6 | 4 stroke | 23.8 GPH |
Does anyone still make 2 stroke outboards?
Yamaha and Mercury have stopped producing direct-injection 2-stroke outboards (Tohatsu still builds a few), but the latest-generation 4-strokes weigh the same as 2-strokes and offer the latest digital advances.
What RPM should I run my outboard?
When a boat is over-propped (the propellers have too much pitch), the outboard(s) highest achievable RPM is lower than the manufacturer’s recommended wide-open-throttle RPM, which typically is between 5000 and 6000 RPM.
What are the features of the Suzuki df90a?
The first of Suzuki’s new generation four-strokes, the DF90A is a showcase of advancements and achievements – such as digital sequential electronic fuel injection, a powerful 2.59:1final drive ratio, zero-maintenance self-adjusting time chain and don’t forget the Suzuki Lean Burn Control System.
How tall is the Suzuki DF80 outboard engine?
Suzuki DF70, DF80, and DF90 Outboard Engine Specifications Item Unit Data DF70AT DF80AT DF90AT Overall length (front to back) mm (in.) 724 (28.5) Overall width (side to side) mm (in.) 459 (18.1) Overall height L mm (in.) 1 480 (58.2)
Is the Suzuki df70a a four stroke outboard?
Suzuki’s engineers are well known for their ability at reducing the size of the outboard. Their skills have created some of the most compact four- stroke outboards in their respective classes. Taking a fresh approach to the DF70A/90A, every part and component has been designed from the ground up.
What kind of fuel injection does Suzuki df70 use?
The fi rst generation DF70 was awarded the National Marine Manufacturers Association’s Innovation Award for, among other fi rsts and advancements, its use of Suzuki’s Multi-Point Sequential Electronic Fuel Injection system.