What to do if WD hard disk is not working?

Go Disk Management > Find your external hard drive and right click it by choosing Change Drive Letter and Path… Assign the drive with a new letter that doesn’t exist in your PC and mark the Partition as Active. Click OK. Restart PC and your External hard drive will show up and work again.

Why is my Western Digital external hard drive not working?

Here are some possible reasons for a WD hard drive not recognized: A hardware problem (damaged components such as a scratched platter or a failed headstack) File system corruption of the hard drive partition. Issues with a hard drive partition.

How do I fix my WD Passport external hard drive not recognized?

Reconnect the WD drive via a new USB hub or to a new PC.

1. If the WD Passport drive shows up, it is the damaged USB hub that stops WD from showing up.
2. If the WD passport is not detected either on your current or the new PC, replace the WD drive with a new one.

How do I reset my WD 1tb external hard drive?

How to Reset a WD Drive

1. Leave the drive turned on but unplug it from your computer.
2. Turn around the drive and locate the “Reset” button on the back panel of the unit.
3. Unbend the leg of a paperclip and insert it into the hole until you depress the reset button and the paperclip won’t go any further.
4. Warning.

How do I fix my external hard drive not responding?

How to Fix the External Hard Disk Is Not Detected Issue?

1. Inspect Hard Drive. Carefully inspect your hard disk for any physical damage.
2. Run CHKDSK.
3. Use an Antivirus & Anti-Malware Tool.
4. Re-Install the Drivers.
5. Format the Disk.

How do I fix Windows not detecting my hard drive?

To check to see if this is the cause of the BIOS not detecting the hard drive, follow these steps:

1. Power off the computer.
2. Open the computer case and remove the data cable from the hard drive. This will stop any power saving commands from being sent.
3. Turn on the system. Check to see if the hard drive is spinning.

How do I fix hard drive not detected?

If the drive still isn’t working, unplug it and try a different USB port. It’s possible the port in question is failing, or just being finicky with your specific drive. If it’s plugged into a USB 3.0 port, try a USB 2.0 port. If it’s plugged into a USB hub, try plugging it directly into the PC instead.

How do you reset an external hard drive?

Click the Go menu, select Utilities from the drop-down menu, and open Disk Utility. Choose your external drive from the left sidebar, and click Erase. Give your drive a name and select the file system you want from the Format drop-down. Click Erase, and the system will reformat your drive.

How do I reset my hard drive without a computer?

There isn’t any practicable way to wipe it without connecting it to a PC. That’s OK, though – just connect it to your new PC and when you boot from the Windows DVD to install Windows you can use the installation program to delete / recreate the partitions on it and format it.

Why did my external hard drive suddenly stopped working?

This could be caused by a virus, a corrupted OS, an improper shutdown, or the deletion of an important folder. On the other hand, physical crashes are caused by physical damage to the actual components of the hard drive. Likely causes could be accidental spills, drops, power surges, or plain old wear and tear.

What happens if hard disk is not working?

Gradual hard-drive failure can be harder to diagnose, because its symptoms, such as corrupted data and slowing down of the PC (caused by gradually failing areas of the hard drive requiring repeated read attempts before successful access), can be caused by many other computer issues, such as malware.

How do I fix Windows 10 not detecting my hard drive?

How to fix “Hard drive not detected” on Windows 10?

1. Re-enable the missing drive in the Disk Management.
2. Reconnect the external hard drive.
3. Format the drive.
4. Check the status of the hard drive.
5. Update the driver.
6. Update Windows.
7. Reinstall USB controllers to make the second hard drive recognized.

How to fix Western Digital external hard drive?

Try uninstalling the old drivers from Device Manager and let the drive install them automatically after a reboot. If that does not help, I would try to download any latest firmware updates from the WD web page. I leave you a link below. Check the drive with another USB cable. Join the community! Show your expertise by helping others!

How to fix disk 1 unknown, not initialized Western Digital?

Case 1. WD 1TB external hard drive becomes not initialized in PC, help! “Hi there, do you know how to fix the problem that WD hard drive cannot be detected on my PC. The WD external hard drive becomes Unknown and Not Initialized in Disk Management.

Why is my WD external hard drive not working?

The flashlight of WD external hard drive continuously blinking when I connect the drive with USB cable. But the problem is that the WD hard drive still not working when I connect it to a new USB cable with the PC. Nothing is detected.

Why is my WD elements 1TB not working?

I have WD Elements 1TB external drive, it has a USB 3.0 Supported cable. Whenever I plug it in my USB 2.0 port, it works fine but in USB 3.0 port, constant white led is there and doesn’t blink. The device manager shows it as not connected and doesn’t appear in Disk Management either. I have Gigabyte B450M-DS3H motherboard and it’s brand new.