How do you make an armature?

Make an Armature for Sculpting!

1. Step 1: Acquire Your Materials. You will need:
2. Step 2: Make the Wire Cuts.
3. Step 3: Wrapping the Shoulders and Spine.
4. Step 4: Wrap the Core Together.
5. Step 5: Add the Shoulders.
6. Step 6: Add the Feet.
7. Step 7: Wrap the Feet.
8. Step 8: Begin Adding the Tin Foil.

What two materials could be used to make an armature?

Armature, in sculpture, a skeleton or framework used by an artist to support a figure being modeled in soft plastic material. An armature can be made from any material that is damp-resistant and rigid enough to hold such plastic materials as moist clay and plaster, which are applied to and shaped around it.

What is the purpose of an armature?

In electrical engineering, an armature is the component of an electric machine which carries alternating current. The armature windings conduct AC even on DC machines, due to the commutator action (which periodically reverses current direction) or due to electronic commutation, as in brushless DC motors.

How do you make a working ball and socket joint model?

You want to use about the same amount of clay as it takes to fill the paper cup. Place the clay ball into the paper cup and press the end of a craft stick into the clay. Rotate the craft stick so the ball moves around inside the cup. This is the same way a ball and socket joint rotates.

Can you fire clay with foil inside?

Most often, saggars are made from coarse sculpture clays that can withstand repeated heating and cooling. But some potters make aluminum foil saggars that do the trick quite nicely. He punches holes in the rims of his saggars to allow airflow, and fires to 1600 degrees F (870 degrees C) in about an hour.

How do you make an armature of a human?

No welding or soldering is required, just wire twisting and bending. I plan to make the sculpture with colored grout, which is hard like cement when it cures. Basically, two wires are laid out side by side in a human-like configuration and twisted together using two pliers turning in opposite directions.

How are wires used in an armature sculpture?

Different configurations of the wires will work. Joints are strengthened when wire exits one limb and enters an adjoining limb or the torso area. Twisting the paired wires shortens their lengths some, and makes the combined wires more rigid than single wires. Twisting is not difficult.

How to make an armature out of hangar wire?

Next you will take a long strip (at least 2 feet in length) of floral wire and hold the two longer pieces of hangar wire parallel with a shorter piece between them for the neck. Take the floral wire and begin wrapping 3/4 of the way up the longer hangar wires along with the neck in place as shown.

How to make an armature for clay sculpting?

1 Acquire Your Materials 2 Make the Wire Cuts 3 Wrapping the Shoulders and Spine 4 Wrap the Core Together 5 Add the Shoulders 6 Add the Feet 7 Wrap the Feet 8 Begin Adding the Tin Foil 9 Cover the Armature 10 Pose Your Armature 11 Voila! Begin Adding Your Clay! 12 Examples