What is on off shift keying?

On–off keying (OOK) denotes the simplest form of amplitude-shift keying (ASK) modulation that represents digital data as the presence or absence of a carrier wave. For a given data rate, the bandwidth of a BPSK (Binary Phase Shift keying) signal and the bandwidth of OOK signal are equal.

Which is called as on-off keying 1 point?

Explanation: Amplitude shift keying (ASK) involves the locking and assembling of the amplitude of the wave. It involves the carrier wave along with the amplitude wave or transmitted wave and hence referred to as on-off keying.

Which digital technique is also called as on and off keying?

The most basic modulation method is called On–Off Keying (OOK). Just shut off the RF carrier if there is a zero to transmit, and send a full-power carrier if there is a one, and you have an OOK modulator.

Why amplitude shift keying is called on-off keying?

In order to carry out amplitude shift keying, we require a carrier signal and a binary sequence signal. It is also known as On-Off keying. This is because the carrier waves switch between 0 and 1 according to the high and low level of the input signal.

What is the advantage of on off keying in ASK?

This type of modulation is called on -off keying and it is the simplest form of the ASK. However ASK is more affected by the thermal noise than the other types of modulation such as FSK and PSK. The main advantage is its simplicity and the needed limited band width.

Where is FSK used?

Frequency-shift keying (FSK) is commonly used over telephone lines for caller ID (displaying callers’ numbers) and remote metering applications.

Which modulation is the most efficient?

6. Which modulation is the most efficient one? Explanation: Of all the modulation showed, QAM is the most bandwidth efficient one.

What is the difference between OOK and ASK?

OOK stands for On Off Keying. OOK is modified version of ASK modulation. While in ASK modulation logic-0 is represented by lower amplitude and logic-1 is represented by higher amplitude; in OOK modulation there is no carrier during the transmission of logic zero.

What is the bandwidth of ASK?

An ASK signal requires a bandwidth equal to its baud rate. Therefore, the bandwidth is 2000 Hz. In ASK the baud rate is the same as the bandwidth, which means the baud rate is 5000.

Which is better ASK or FSK?

yes , FSK is better than ASK in the cases that the carrier has a constant amplitude and hence are used in the communication systems wher security reasons are considered …. but it cannot be said that it fades less as over long distance communication its SNR decreases and hence quality of signals …

What is the bandwidth of on off keying?

On-off keying. For a given data rate, the bandwidth of a BPSK (Binary Phase Shift keying) signal and the bandwidth of OOK signal are equal. In addition to RF carrier waves, OOK is also used in optical communication systems (e.g. IrDA ).

When to use on-off or OOK keying?

On-off keying is most commonly used to transmit Morse code over radio frequencies (referred to as CW ( continuous wave) operation), although in principle any digital encoding scheme may be used. OOK has been used in the ISM bands to transfer data between computers, for example.

What does on off keying ( OOK ) modulation mean?

On-off keying (OOK) modulation is a further simplification of this method, where the source sends NO carrier when it wants to send a ‘0’.

Is the bandwidth of BPSK and Ook equal?

For a given data rate, the bandwidth of a BPSK (Binary Phase Shift keying) signal and the bandwidth of OOK signal are equal. In addition to RF carrier waves, OOK is also used in optical communication systems (e.g. IrDA ).

https://www.youtube.com/watch?v=1Q2tdcSZGvY