How much power does a ViewSonic monitor use?

The VA2451m from ViewSonic is a 24-inch model with LED backlighting. We were surprised to find that it only drew in 20.5 watts of power when powered up and displaying images on the screen. That is a four-inch bigger panel that uses slightly fewer watts.

Is ViewSonic a good monitor brand?

ViewSonic Recognized as the Best Monitor Brand for 2020 by PC Magazine. Brea, California (March 25, 2020) – ViewSonic Corp., a leading global provider of visual solutions, was recognized as the Best Monitor Brand for 2020 by PCMag. In the computer monitor category, ViewSonic came out on top.

How do you unlock a ViewSonic monitor?

Press and hold down the button labelled “1” as well as the “down” arrow. After 10 seconds, release both buttons simultaneously. This should unlock the OSD, which gives you full access to the monitor’s control panel.

How can I make my ViewSonic monitor look better?

Despite the variations, most ViewSonic models share a common interface that uses an on-screen display (OSD) to adjust color.

1. Press the “1” button on the left of the monitor’s front control panel to open the main menu.
2. Press the “Down” button until the OSD highlights the “Color Adjust” option.

How much does a ViewSonic monitor weigh?

Compare with similar items

Is Acer or ViewSonic better?

The ViewSonic XG2402 is better than the Acer XF251Q Bmiirx. The XG2402 has much better motion performance, thanks to the faster 144 Hz refresh rate. The XG2402 is also a bit brighter, and has a better color gamut and better color volume.

Is ViewSonic better than Asus?

The ViewSonic XG2402 is much better than the ASUS VG245H. The XG2402 has a higher refresh rate, and a wider FreeSync range, ensuring a more fluid, tear-free gaming experience. The ViewSonic also has a better response time, so fast-moving objects appear clear with no blur trail.

How do I calibrate my ViewSonic Touchscreen?

ViewSonic Customer Care

1. Click Start and then Control Panel, and next Hardware and Sound.
2. Under Tablet PC Settings, tap Calibrate the screen for pen or touch input.
3. On the Display tab, under Display options, tap Calibrate and then Yes to allow the program to make changes.

Why does my ViewSonic monitor says out of range?

Out of range message Print This happens when the screen resolution is set to something higher than what the projector can display. For example, if the projector supports resolutions of up to 1080×1920 and the video card allows up to 2460×1440, setting the resolution to the highest setting will display the error.

Why is my ViewSonic monitor green?

The problem is usually caused by a loose video cable. The first thing you should do is make sure that both ends of your video cable are snug and secure. Tighten the screws on both the monitor and the computer end of the cable. If that doesn’t work you might need a new video cable.

How do I remove the base from my Viewsonic monitor?

1. Unplug the monitor power cord from the outlet, and disconnect the monitor from the computer.
2. Place the monitor screen side down on a towel over a flat surface.
3. Locate the locking knob on the bottom of the base. Turn the locking knob counterclockwise 90 degrees with your fingers. Pull the base off the monitor.