How much horsepower does a 383 small block have?

The 383 stroker engines have been reported to achieve 330 horsepower with 410 foot-pounds of Torque, 395 horsepower with 410 foot-pounds of Torque and 395 horsepower with 410 foot-pounds of Torque.

How much power can you get out of a 383 stroker?

Reported Performance Range The GM ZZ383 Performance engine has 425 horsepower and 449 foot-pounds of torque. Other 383 stroker engines have been reported achieving 330 horsepower with 420 foot-pounds of torque, 395 horsepower with 410 foot-pounds of torque and 395 horsepower with 410 foot-pounds of torque.

Are 350 and 383 blocks the same?

So a 383 is actually only 28 cubic inches larger than a typical / comparable rebuilt 350 which is in fact 355 cubic inches.

What size block is a 383 stroker?

It’s simply the geometric shape x bore x stroke x the number of cylinders: 0.7853981 x 16 x 3.480 x 8 = 349.8. Round the figure off and you have 350 ci. A 383 stroker has a 0.030 over bore of the stock 350, giving you 4.030 as a bore diameter. Putting the 400 crank in the 350 increases the stroke to 3.750.

How much HP does a stroker kit add?

So, as a given rule, the more cubic inches an engine is, the more power it will make. However, the horsepower output will largely depend on the overall combination you are using. We could take a 500″ short block and with stock heads and a mild cam, it might make around 450-475 horsepower.

How do you turn a 383 into a 350?

How to Convert a 350 Into a 383 Stroker

1. Purchase and install a 383 stroker crankshaft, rod and 10.5-to-1 piston set.
2. Install a set of four-bolt steel main caps over the center two crankshaft mains if you’re using a two-bolt-main block.
3. Install a set of ported L31 Vortec cylinder heads.

How much does it cost to bore out a 350 to a 383?

The machine work is usually in the $250~300 range for bore & hone to size ( including cam bearing install if desired). Bottom edges of block may need light relieving to clear rod bolts.

How much does it cost to bore a 350 to 383?

How do you tell if a 350 is a 383 stroker?

A 383 stroker is a 350 block with a 400 crankshaft. Check the casting numbers on the block to verify it to be a 350. Check the harmonic balancer as it is not solid but machined to to balance the rotating assembly. also the fly wheel or flex plate will have a larger weight on it than the other small blocks.

What kind of blower does a 383 Chevy have?

Actual item may vary. SBC 383 Blower Motor, Dart SHP Block, Scat Crankshaft, Scat H Beam Rods, Mahle Pistons, Hydraulic Roller Camshaft, AFR Heads, Weiand 6-71 Blower, Dyno Tested Buy in monthly payments with Affirm on orders over $50.

What kind of engine is in Chevy 383 short blocks?

Chevy 383 Short Blocks CNC-Motorsports Chevy 383 stroker short blocks have quickly raised the bar to a new level in offering high quality performance short blocks at an affordable price. CNC dart short blocks have become a huge hit among racers and performance enthusiast all over the world.

How does a Lukovich short block engine work?

Lukovich SBC Short Block Kits Lukovich 383 / 468 ci Small Block Chevy Short Block Kits use name brand, quality components and include internal/external balancing with pin fitted rods and pistons. The block is machined, honed, race prepped, washed & lubricated, then sealed in a plastic bag ready for assembly.

What kind of engine does CNC short blocks have?

CNC-Motorsports Chevy 383 stroker short blocks have quickly raised the bar to a new level in offering high quality performance short blocks at an affordable price. CNC dart short blocks have become a huge hit among racers and performance enthusiast all over the world.