What size pedal wrench do I need?

Pedal wrench flats are typically 15mm in size. 9/16″ (~14.3mm) is somewhat common on older pedals. 17mm and other sizes have been used, but you aren’t very likely to encounter them. (A “cone wrench” is thinner and shorter than a pedal wrench, and unable to provide appropriate durability or leverage for use on pedals.

Do you need pedal wrench?

All modern pedals will screw into the crank arm using either one of two tools. Most pedals (like our reliable Thump flat pedals) require a pedal wrench, which is a long, thin tool specifically designed to fit the external spindle flats between the pedal and the crank leg (fig. 3).

What is a pedal spanner?

The length of a pedal spanner is for removing badly installed, dry or corroded, pedals, NOT for doing up properly greased ones. 7. The right hand (drive-side) pedal tightens up by turning the axle clock-wise, so follow the same method, but turn the axle clockwise (or the crank anti-clockwise).

How do you remove Allen key pedals?

Insert the small end of the Allen key in the backside of the crank arm, with the long end of the Allen key pointing toward the back of the bike. Using your right hand, push down on the Allen key, turning it clockwise to loosen the pedal.

Can I use a regular wrench instead of a pedal wrench?

Determine Your Pedal’s Size Since you don’t have a pedal wrench, typically, your standard 15 mm open-end wrench will do the trick just as easily. Once you’ve located the flat wrench spindle next to the bike pedal, it’s time to get to work.

Do you need a torque wrench to install pedals?

Yeah, pedals should be tighter than just “hand tight” and you don’t need a torque wrench.

What to do if you don’t have a pedal wrench?

Since you don’t have a pedal wrench, typically, your standard 15 mm open-end wrench will do the trick just as easily. From there, take a look at the pedal and ensure that it has a wrench flat on the spindle for your wrench to attach to. If the pedal doesn’t have this, this method, unfortunately, will not work.

How do you tell if my pedals are 1 2 or 9 16?

If the cranks are THREE PIECES, meaning two crank arms bolted to a spindle, it will be 9/16 thread on the pedals. If the crank is ONE piece through a large bottom bracket housing, it’s 1/2 thread.

Is it easy to change bike pedals?

Fortunately, you can easily replace your bike pedals at home using a few simple tools. When you replace your bike pedals, take the time to install the new pedals correctly so you don’t have a hard time taking them off in the future.

Can you over tighten pedals?

You’re not strong enough to over tighten them with a 19cm (7.5″) standard wrench. Look how much longer a pedal wrench is and people don’t really worry about over tightening.

How big is a park tool pw-3 pedal wrench?

Made from Cro-Moly steel for a shop quality pedal wrench made to last. 15mm and 9/16″ precision openings and a long, round, vinyl dipped handle that won’t dig into your hand like flat pedal wrenches. The PW-3 is nominally 32cm (12.5″) long. New material and new design!

What kind of steel is a pedal wrench made of?

Made from Cro-Moly steel for a shop quality pedal wrench made to last. 15mm and 9/16¿ precision openings and a long, round, vinyl dipped handle that won¿t dig into your hand like flat pedal wrenches. This shopping feature will continue to load items when the Enter key is pressed.

Why do you need a long handle on a pedal wrench?

The long handle makes it easy to get the leverage you need if your pedal is seized up, and a comfortable vinyl grip prevents your hand from slipping when putting down the torque. Video Player is loading. This is a modal window.