Where is the input turbine speed sensor?

Located on or inside your vehicle’s transmission, the turbine speed sensor measures the RPM of the turbine shaft. Once the PCM or TCM detects an irregularity in the turbine speed input, it will trigger the illumination of the Check Engine Light.

What does code P2767 mean?

Input/Turbine Speed Sensor
OBD-II Code P2767 is defined as a Input/Turbine Speed Sensor “B” Circuit no Signal. The Input Speed Sensor tells the Transmission Control Module (TCM) how fast the engine is spinning so the correct gear can be engaged.

What is turbine speed sensor?

A turbine speed sensor, also termed an input speed sensor, is used for measuring the performance of the turbine by evaluating transmission performance and other components of the turbine. It also detects the rotation speed of the turbine, which shows the input revolution of the transaxle.

What is the input speed sensor?

Transmission speed sensors are used to calculate the actual gear ratio of the transmission while in use. The first is known as the input shaft speed (ISS) sensor. As described, this sensor is used to monitor the speed of the transmission’ input shaft. The other sensor is the output shaft speed (OSS) sensor.

How do you test an input speed sensor?

You can test your VSS to make sure it’s functioning properly by using a device called a multimeter. Start by disconnecting and removing the VSS from your engine so you can test it. You can then connect it to a multimeter and set the multimeter to the AC setting.

Can I drive my car with a faulty speed sensor?

That is why in general, it is unsafe to drive a vehicle with a broken wheel speed sensor. If the wheel speed sensor becomes damaged or wears out, initially you probably won’t notice much difference in the way your car performs if your ABS light comes on unless you are driving on slippery pavement.

How do I fix error code P2767?

What Repairs can Fix the P2767 Code?

1. Repair or replace any damaged or corroded wiring and connectors.
2. Flush and fill transmission fluid.
3. Repair or replace damaged or defective input speed sensor circuits and connectors.
4. Repair or replace damaged or defective output speed sensor circuits and connectors.

How much is a new speed sensor?

Depending on the vehicle year, make and model, a speed sensor can cost as little as $7.92 or as much as $100. For most vehicles, the cost for a speed sensor is between $25 and $45. Follow these procedures for replacing a faulty vehicle speed sensor (VSS).

What is the difference between input and output speed sensor?

Transmission input/output sensors calculate the transmission’s actual gear ratio during usage. The first sensor, referred to as the input sensor, monitors the speed of the transmission’s input shaft. The second sensor is the output sensor, which monitors the output shaft speed.

What are the symptoms of a bad input speed sensor?

5 Common Bad Speed Sensor Symptoms

• Transmission problems.
• Erratic speedometer readings.
• Inability to engage cruise control.
• Lack of torque converter clutch application.
• Check Engine Light is triggered.
• An internal electrical fault in the speed sensor.
• Damage on the sensor itself.
• Poor vehicle maintenance.

How can you tell if the speed sensor is bad?

5 Common Bad Speed Sensor Symptoms

1. Transmission problems.
2. Erratic speedometer readings.
3. Inability to engage cruise control.
4. Lack of torque converter clutch application.
5. Check Engine Light is triggered.
6. An internal electrical fault in the speed sensor.
7. Damage on the sensor itself.
8. Poor vehicle maintenance.

What is the difference between an input and output speed sensor?