How do I fix battery error 601?

Unplug the laptop from the power supply and remove the battery. Press and hold the power button for 20 seconds after removing the battery. Then, without the battery, plug the power cord into your PC. Finally, reboot your HP system to see if the problem persists.

How do I get rid of 601 error on startup?

Primary (internal) Battery (601)

1. Turn off your computer.
2. Take off your battery and unplug your power cord from the laptop.
3. Press and hold the power button for 20 seconds.
4. Put back your battery in and plug your power cord in.
5. Try to turn on your laptop and see if the battery warning message still there.

What is the primary internal battery 601?

The 601 error is most often caused when the battery has lost its effectiveness at holding a charge and needs to be replaced. As mentioned above, this is the primary removable battery and not the internal CMOS battery. If you have a bad CMOS battery, a 602 error message will be seen.

How do I fix non HP battery?

Check with an alternate battery….

1. In the search box, type and open “Device Manager”.
2. Expand “Batteries”.
3. Right click the “Microsoft ACPI-Compliant Control Method Battery” that is listed there.
4. Click on “Uninstall”.
5. At the prompt put a check in the box to remove the current driver.
6. Shutdown the computer.

How do you fix low battery capacity?

To save battery life, try not to: Use the camera much. Play highly interactive games. Use apps for long periods….

1. If you don’t need your mobile network, turn on Airplane mode .
2. Use Wi-Fi instead of mobile data.
3. Turn off Bluetooth.
4. Turn off Location access. Some apps and features won’t work when Location is off.

How do I run a battery diagnostic on Windows 10?

1. Press Windows Key + X to open Win + X menu.
2. Choose Command Prompt (Admin). (Note: This opens Command Prompt as an administrator, which allows you to run a battery report for your laptop).
3. When Command Prompt opens, type in the same command you use for Windows PowerShell: powercfg /batteryreport and run the report.

Why does my computer not recognize the battery?

Check the battery status. Open the Device Manager, select Batteries, then right-click your laptop’s battery and select Properties. If you see text stating your device is working properly, then your battery is fine and the no battery detected bug is likely caused by something else. Update the battery’s device drivers.

Can you fix battery health?

Battery health degraded Your battery’s health is significantly degraded. An Apple Authorized Service Provider can replace the battery to restore full performance and capacity. More about service options…

What does internal battery error ( 601 ) at startup mean?

Recently had Internal Battery Error (601) at startup. Ran the HP Diagnostic Tool and the result was Failure with the following ID: I couldn’t figure out what to do with this error.

Do you receive the error message ” 601 “?

Remove main battery then boot. Do you receive the error message??? If Primary (internal) Battery (601) appears in the alert message, it means the measured storage capacity of the primary (internal) battery is less than 25% of the original storage capacity. The number “601” denotes the associated error code that is recorded in the system log.

What does 601 stand for in system log?

The number “601” denotes the associated error code that is recorded in the system log. They should change it to say MAIN battery. 07-29-2014 11:02 AM When I shutdown laptop and remove main battery I don’t receive error message.

What should I do if my hp 601 battery goes bad?

If you purchased the battery from a reseller, contact HP. 607: Primary (internal) Battery is Weak with Low temperature. 608: Secondary (internal) Battery is Weak with Low temperature. Download a BIOS update from the HP website. Go to the HP Customer Support – Software and Driver Downloads page.