Can you keep a stern drive in the water?

To keep water from entering the exhaust hub when storing your sterndrive, leave it in the “down” position or use a waterproof cover.

Are stern drives bad in salt water?

Not many people talk about that, but it just shows the technology in the sterndrive market.” Technology has also improved corrosion protection – especially in the saltwater environment – for sterndrives. So you can have a successful sterndrive experience in saltwater.” All of those things sound good.

Whats better outboard or inboard?

Inboard vs. Because it will usually weigh less and be a more-efficient design, an outboard motor will typically deliver better fuel economy than a sterndrive. However, most sterndrives can not be tilted completely out of the water, while most outboards can clear the water when tilted all the way up.

What is the difference between inboard and I O?

True Inboard vs I/O A true inboard is fully inside a boat and an I/O has components within and outside of the boat. A true inboard is less common. True inboard motors will be found on boats designed for skiing as they produce less wake and drive much smoother.

Is a stern drive good?

The advantages to a sterndrive are the vessel design and ability to offer larger horsepower options. With a lot of fishing boats, the rear deck space and access is important. For those looking to do water sport, it can be beneficial having a rear swim platform without a motor protruding in the middle.

Is Stern drive an outboard?

A sterndrive combines inboard power with outboard drive. The engine sits just forward of the transom while the drive unit (outdrive or drive leg) lies outside the hull.

Can you Wakesurf behind a stern drive?

Inboard boats, including direct drives and V-drives, are the only types of boats you can safely wakesurf behind. To recap, you should ONLY wakesurf behind an inboard board, never behind an outboard or inboard/outboard (stern drive) due to the risk of making contact with the propeller and the proximity of the exhaust.

How long do stern drives last?

It’s also common to expect between 10-15 years out of a well-used sterndrive and transom assembly, and then it’s a matter of continual repairs or replacing it once and for all.

Why are inboard boats so expensive?

There are two types of motors, inboard and outboard. An inboard motor will usually be more expensive due to it being located inside of the boat. This can make it more challenging when it comes to maintenance and repair. A motor that has a higher horsepower, that can reach higher speeds is going to increase the cost.

How long do inboard motors last?

An inboard engine can run for an average of between 1500 to 2000 hours depending on the type. As with outboard engines, maintenance is crucial to prolonging the usefulness of an inboard motor. Ventilation is crucial for an inboard motor and should be continuously checked; otherwise overheating could cause a fire.

Why are boat motors so expensive?

Boat motors (outboards) are expensive because they are equipped with high-quality parts that are not only designed to resist constant working at max RPMs but made with materials meant to resist corrosion well. All of this needs significant work in R&D (more money), resulting in a pricey product.

Why are outboard motors so unreliable?

Why are boat engines unreliable? Many boat engines are “unreliable” because they are not taken care of correctly. While some boat engines are less reliable than others, there are common engine issues that appear from overuse, ill-maintenance, or low-quality materials.

What’s the difference between outboard and stern drive?

The difference is that since the outboard shaft is connected to the engine, and the entire engine tilts, there is no potential for drive damage. When a stern drive is tilted, the engine remains in position. The tilt is made possible due to a component known as a universal joint.

What’s the difference between inboard and outboard engines?

While outboard engines are usually less powerful than inboards, you can match the power by having a few outboards on your boat. Sterndrive engines, also known as inboard/outboards (I/O), are a combination of inboard and outboard engines, as their name suggests. In sterndrive engines, the motor is in the back of the boat under the transom.

Where is the motor located on a sterndrive boat?

Sterndrive engines, also known as inboard/outboards (I/O), are a combination of inboard and outboard engines, as their name suggests. In sterndrive engines, the motor is in the back of the boat under the transom.

Which is quieter a sterndrive or an outboard engine?

This is another easy win for the outboard. At cruising speed the outboard is 6 decibels (dbA) quieter than the sterndrive and 11 dbA quieter than the jet. The dbA scale is logarithmic, so a change of 10 dbA is a change by a factor of 10. Which means the jet is more than 10 times “louder” than the outboard.