How do you use a Bostitch staple gun?

Grasp the arm and close it down over the carrying tray. As you move the arm downward, you will feel the tension of the hinge return. Push down forcefully on the the arm to make a test staple. The stapler is now loaded and should be ready for use.

Why does my staple gun not work?

When any important part is broken or worn out, the tool simply won’t work. Before you start using a staple gun, check to ensure the spring, hammer, and rail are correctly assembled and undamaged. Small variances can gum up the works and cause staples to jam or defeat the spring or hammer mechanisms.

How do you load a heavy duty stapler?

How to Load your Heavy Duty Stapler:

1. Place stapler on a flat surface.
2. Pull the stapler slide mechanism out of the back of the stapler so there is room to insert the staples.
3. Insert the staples onto the stapler slide.
4. Reinsert the slide mechanism back into the stapler slide.

What is the best heavy duty stapler?

Best Heavy-Duty Staplers Reviews

1. Bostitch Auto 180 Xtreme Duty Automatic Stapler, 2-180 Sheets.
2. Bostitch Impulse 45 Sheet Electric Stapler.
3. Onotio Heavy Duty 100 Sheet High Capacity Office Desk Stapler.
4. Rapid HD220 Heavy Duty Stapler.
5. Swingline Stapler Optima 40 Desktop Stapler.
6. Swingline Stapler 747 Iconic Desktop Stapler.

How do you load a vintage Bostitch T5 stapler?

Bostitch staplers, such as the Bostitch T5, load from the front of the magazine. The magazine cover is located right next to the aperture through which the staples exit when you shoot them. Lift the cover to unhook it and tilt it open.

Why does my electric staple gun keep jamming?

1. Staple Jam. First make sure the staples being used are the correct size for the staple gun. Guide rails along which the staples feed are designed for a specific distance between each staple point, and even a fraction of a millimeter can cause an uneven flow of staples and result in a staple jam.

What does the knob on the staple gun do?

To adjust force that will be exerted on the fastener to drive it deeper into the work piece, use the Depth Adjustment Knob located at the top of the Staple Gun-see Figure 3. Turn the Depth Adjustment Knob clockwise to increase the force to drive the fastener, and counterclockwise for less force driving the fastener.

What’s the best way to use a Stanley stapler?

Hunker may earn compensation through affiliate links in this story. Stanley recommends choosing staples long enough that approximately 3/16 inches of the staple penetrates the items being stapled. Never point a staple gun at a person or animal. Always hold the gun facing away from you.

How do you load a Bostitch heavy duty stapler?

Most of our staplers load using the simple, four-step process below. Flip. Flip the stapler upside down and open the base away from the body. Pull. Pull the magazine pusher back to expose the staple channel. Drop. Drop the staples into the magazine channel with the points facing up. Push. How do you fill a large stapler?

What do you need to know about the Stanley staple gun?

Never point a staple gun at a person or animal. Always hold the gun facing away from you. Engage the handle lock whenever you set the staple down to avoid accidental discharge. The Stanley Sharpshooter Staple Gun is a heavy-duty staple gun you can use for upholstery, decorating, crafts or construction.

How big are staples in a Stanley sharpshooter stapler?

The gun uses Stanley heavy duty staples from 1/4 inch to 9/16 inch long. A loading window on the front of the gun lets you see when you’re almost out of staples, and the locking handle prevents staples from being fired off accidentally. Ensure the handle safety is on and the handle is locked down.Turn the stapler so the bottom is facing up.

https://www.youtube.com/watch?v=oaOV-pj0EXk