How strong is Kee Klamp?
How strong is Kee Klamp?
A KEE KLAMP fitting (size 5 to 9) can support an axial load of 2000 lbs (900 kg). per grub screw with the grub screw tightened to a torque of 29 lbs. ft. (39 Nm); rating includes a safety factor of 2:1.
What are Kee Klamp fittings?
Kee Klamp fittings are iron castings manufactured to the requirements of ASTM A47-77-32510. A range of fittings to suit eight sizes of pipe is available. Hex set screws firmly lock the pipe into the fitting. Set screws are manufactured in case hardened steel and are protected against corrosion by Kee Koat®.
How does Kee Klamp work?
The “secret” of the Kee Klamp system is it’s set screw. When tightened down the sharp edge of the set screw locks the fitting into the pipe, creating a solid, structural connection. No costly welding or awkward threading is required. Kee Klamp fittings easily slip onto the pipe and can be attached at any point.
What are key clamp fittings?
Tube Clamp fittings, also known as key clamps, are black malleable fittings with a galvanised finish. We have all the most popular items in stock & in all sizes which are compatible with the Kee Klamp system. The range includes all the standard, swivel and slope range fittings, for use on disabled handrails.
What are Q clamps?
Q Clamp fittings, also known as key clamp fittings, are black malleable fittings with a galvanised finish. The range includes all the standard, swivel and slope range fittings, for use on disabled handrails. All clamps come supplied with grub screws and additional or replacement screws can also be purchased.
What is Gator tubing?
Gator Tubing is our preferred choice of pipe for most DIY projects and industrial applications. Gator Tubing has a special coating called Gator Shield that is more resistant to corrosion than standard galvanization.
What size is scaffold tube?
48.3mm
Scaffold tube should be made to EN39 and be galvanised steel. They should have a diameter of 48.3mm and a 3.2mm – 4.0mm wall thickness. Tubes should appear straight visually and not deviate by more than 15mm in any 3m length. This is where the tube has been used as a means of hitting another object.
How thick is 10 gauge pipe?
Wall Thickness and Pipe Schedule
| Gauge | Thickness Range(inches) | Typical Value (inches) |
|---|---|---|
| 11 | 0.112 through 0.122 | 0.12 |
| 10 | 0.126 through 0.136 | 0.134 |
| 9 | 0.140 through 0.150 | 0.148 |
| 8 | 0.157 through 0.167 | 0.165 |
What is Gatorshield?
Gatorshield® Galvanized Steel Tubing Home All Products Gatorshield® Gatorshield® manufactured by Allied Tube & Conduit is a patented triple layer Flo-Coat® rust and corrosion resistant product which has shown itself to be the best over the long haul versus all competitive product offerings.
What are the 3 types of scaffolds?
There are three basic types of scaffolds:
- Supported scaffolds, which consist of one or more platforms supported by rigid, load-bearing members, such as poles, legs, frames, outriggers etc.
- Suspended scaffolds, which are one or more platforms suspended by ropes or other non-rigid, overhead support.
What is the longest scaffold tube?
Galvanised Scaffold tube is available in sizes, up to 21ft / 6.4m in length. Tube size: 48.3 x 4.0mm wall thickness.
What thickness is 11 gauge?
15 U.S. Code § 206. Standard gauge for sheet and plate iron and steel
| Number of gauge | Approximate thickness in fractions of an inch | Weight per square foot in kilograms |
|---|---|---|
| 11 | 1/8 | 2.268 |
| 12 | 7/64 | 1.984 |
| 13 | 3/32 | 1.701 |
| 14 | 5/64 | 1.417 |
What do you need to know about Kee Klamp fittings?
Kee Klamp fittings are galvanised, making them ideal for indoor or outdoor use. The only tools required for building Kee Klamp structures are a pipe cutter and a standard hex key. What style or types are available? Over sixty styles of Kee Klamp fittings are available to meet almost any structural pipe needs.
What kind of cast iron is Kee Klamp made out of?
Kee Klamp fittings are generally made from cast iron* and are manufactured to the requirements of EN 1562 & EN 1563 and galvanized to the requirements of EN ISO 1461. A range of fittings to suit eight sizes of pipe is available.
What’s the grub screw for Kee Klamp pipe?
When constructing with Kee Klamp fittings we recommend that you tighten the grub screw to 29 lbs./ft. or 39 Nm. This is approximately “hand-tight.” What size hex key is used with Kee Klamp fittings? Size 4 fittings use a 3/16″ (4.76mm) A.F. (Across Flat) hex key, while Sizes 5 and 6 use a ¼” (6.35mm) A.F. hex key.
How big is a 60mm key clamp fitting?
These 60mm Key Clamps are designed to fit 60.3mm outer diameter tube. Industry standard 2″ Galvanised Nominal Bore tube is the standard tube that is recommended for use with these fittings. We do not recommend, or guarantee, that any of our fittings will work with alternatively sourced tubing.