What is Nylog blue used for?

GASKET & THREAD SEALANT Threaded connections coated with Nylog will block high pressure leaks by forming a hydraulic seal. Nylog can be used an assembly lube when installing shaft seals, o-rings, schraeder valves, ball valves, or other internal system components.

What is Nylog red used for?

It’s a Lubricant: Nylog can be used as a high tack assembly lube when installing shaft seals, o-rings, schrader valves, ball valves, unloaders or other system components.

Which Nylog for r134a?

Rt201b (blue label) is the stuff to use with r134a / PAG oil systems. Label says it is also compatible with POE oil, whatever that is. 1 of 1 found this helpful.

What is refrigerant oil?

Refrigerant oil is a special high-temperature formulation designed for use in cooling systems, so it is important to use the recommended lubricant for the equipment. Oil that is too light will not adhere properly, causing inadequate lubrication.

How do you use a leak lock?

Leak Lock should be applied to clean joint surfaces, either with the applicator brush or any convenient spatula. Apply Leak Lock to both mating surfaces. Tack should be allowed to develop before joints are assembled. Applications – Leak Lock is ideal for joining dissimilar metals and materials.

Does Nylog Harden?

Product Description: A viscoelastic liquid derived from refrigeration grade lubricants. Non- hardening, non-drying fluid which bonds tenaciously to many different substrates. Typically, one drop of Nylog can be stretched about three feet before breaking.

What oil does 410A use?

synthetic oil
All air conditioners use an oil to keep the compressor lubricated during operation. R-22 air conditioners use mineral oil and R-410A systems use synthetic oil.

Is refrigerant a liquid or gas?

The refrigerant, a chemical compound that changes easily from liquid to a gas. When the refrigerant is pushed into the compressor, it is a low pressure gas.

Does leak lock Harden?

Hot or cold, Leak Lock does its job. It never hardens and it never becomes brittle. This means that regardless of temperatures and physical shock, Leak Lock will always maintain a perfect seal. Leak Lock seals most chemicals including all refrigerants (R-12, 22, 502, 134A, etc.)

What are the operating pressures on a R-410A?

The first thing to realize is that when a system is off and equalized, the system’s pressures on both the high side and the low-pressure side will match. In the example of an R-410A packaged unit with a surrounding air temperature of 70°F, the pressure on both the high and low-pressure side of the system will be 201 PSIG.

When to use nylog in a hydraulic system?

Threaded connections coated with Nylog will block high pressure leaks by forming a hydraulic seal. Nylog can be used an assembly lube when installing shaft seals, o-rings, schraeder valves, ball valves, or other internal system components.

How does nylog blue work in a refrigeration system?

Nylog Blue is an elastic fluid made from synthetic refrigeration grade compressor oil. Nylog Blue is fully miscible and compatible with all system refrigerants and oils. Gaskets coated with Nylog will never dry or become heat fixed to the surface. Threaded connections coated with Nylog will block high pressure leaks by forming a hydraulic seal.

What kind of oil is nylog Blue made of?

Nylog Blue is a viscoelastic fluid made from synthetic refrigeration grade compressor oil. Nylog Blue is fully miscible and compatible with all system refrigerants and oils.