How do I connect my AV receiver to my computer?

To accomplish this, you need to connect the audio input of your computer to the audio output of your stereo receiver. We recommend a 3.5mm mini phone plug to Rca jack adapter with a RCA jack stereo cable which plugs into the “line” or “mic” input of your computer’s sound card.

What is HDMI CEC on Onkyo receiver?

HDMI CEC (RIHD) Setting to “On” enables the input selection link and other link functions with HDMI connected CEC compliant device. When connecting a non-CEC compatible component, or when you are not sure whether it is compatible, set the setting to “Off”.

Does Onkyo support HDMI ARC?

The TX-NR609 supports ARC.

How do I connect my Onkyo receiver to my computer via Bluetooth?

How to Pair Bluetooth Devices to Onkyo TX-NR676

1. 1 Enable Bluetooth. Press the Bluetooth button your remote. The Receiver will show Now Pairing…
2. 2 Choose Device for Bluetooth. For the next step we need to know what device you intend to connect to.

How do I get digital audio output from my computer?

To connect digital audio from your PC to an AV receiver:

1. Connect the Digital Out connector on the back panel of your PC, to the Digital Input (SPDIF) on your AV receiver or digital audio system. Use only one Digital Audio Out connector at a time.
2. Select the AV receiver input.
3. Use the AV receiver to adjust the volume.

How do I connect my PC to my AV receiver with HDMI?

Once you have two HDMI cords leading out of your computer, simply hook one of them up to an HDMI input, and the other to an input on your AV receiver. Tune your TV to the input your PC is connected to, and do the same with your receiver.

What is the difference between CEC and ARC?

CEC will enable control of on/off & volume of compatible AV Receivers or Soundbars via your Televisions remote control. ARC or Audio Return Channel will send sound back down the HDMI cable connected from your AVR or Soundbar.

What are CEC commands?

From Wikipedia, the free encyclopedia. Consumer Electronics Control (CEC) is a feature of HDMI designed to control HDMI connected devices by using only one remote controller; so, individual CEC enabled devices can command and control each other without user intervention, for up to 15 devices.

Is it better to use HDMI ARC or optical?

To begin with, HDMI ARC is the best choice if you want the absolute best audio quality possible. It supports all the latest audio formats, and lets you use the same remote for all devices. Moreover, it helps you eliminate tangled cables and clutter. On the other hand, optical cables still offer decent sound quality.

How do I connect my Onkyo receiver to HDMI ARC?

How to Enable ARC LG 47LW550T Onkyo TX-SR608

1. Press Setup on the Onkyo Remote.
2. Assuming you have OSD enabled, you will see the setup menu on screen.
3. Go to Hardware Setup.
4. Go to HDMI.
5. Set HDMI Control (RIHD) to On.
6. Set Power Control to On.
7. Set TV Control to On.
8. Exit Setup by pressing the Setup button on the Onkyo remote.

How do I connect my wireless headphones to my Onkyo receiver?

Open the Action Center, and choose Connect.

1. Select the user menu in the bottom-right corner.
2. Select Bluetooth.
3. Turn on Bluetooth.
4. Place your Bluetooth device in pairing mode.

What kind of sound does Onkyo tx-nr609 have?

The Onkyo TX-NR609 is a first-rate home theater receiver. Of course, with THX® Select2 Plus™ certification you expect excellence. You also get the latest surround sound options, including Dolby® TrueHD and DTS-HD™ Master Audio — two high-resolution formats found on many Blu-ray movies.

What kind of TV do I need for Onkyo?

I have recently bought a Samsung LE40C750 TV, Sony BDP S570B which are both connected to the Onkyo HT-S6305B home cinema system. I have the Blu ray player (and a BT Vision box) connected with HDMI and the HDMI out goes to the TV using ARC for audio.

Is it possible to connect a Yamaha Onkyo to a TV?

Not sure if its possible now, but I’d suggest a Yamaha over the Onkyo. You can set it up for HDMI pass through so you can lower the receiver off, and video AND audio will pass to the tv. Turn the receiver on, and only video passes through.

Why is my Onkyo receiver playing sound as PCM and not?

As above the Player (your PC) will be capable of decoding the HD audio ‘on-board’ so sends LPCM to the AVR! If you reset the PC to Bistream the wee HD audio logo will light up on the AVR – the sound will stay the same though and potentially you lose any ‘secondary’ audio you are trying to access on the BD disc.