How do I get into BIOS on ThinkCentre?

To enter BIOS via function key (Fn) Press F1 at the Lenovo, ThinkPad, ThinkStation, or ThinkCentre logo during bootup.

How do I update my BIOS Windows 8?

Click on Update from the left side menu. Locate the System BIOS Update, click on it, and then click Update. The BIOS Update will now be installed on your computer. Your computer will restart.

How can I enter BIOS if F2 key is not working?

If the F2 prompt doesn’t appear on the screen, you might not know when you should press the F2 key….

1. Go to Advanced > Boot > Boot Configuration.
2. In the Boot Display Config pane: Enable POST Function Hotkeys Displayed. Enable Display F2 to Enter Setup.
3. Press F10 to save and exit BIOS.

What is the BIOS key for Windows 8?

F12 key method

1. Turn the computer on.
2. If you see an invitation to press the F12 key, do so.
3. Boot options will appear along with the ability to enter Setup.
4. Using the arrow key, scroll down and select .
5. Press Enter.
6. The Setup (BIOS) screen will appear.
7. If this method does not work, repeat it, but hold F12.

How do I fix Windows 8 not booting?

Table of Contents:

1. Operating System.
2. Specific Windows 8 No Boot Issues.
3. Verify the Computer Finishes Initial Power-Up (POST)
4. Unplug All External Devices.
5. Check for Specific Error Messages.
6. Reset the BIOS to Default Values.
7. Run a Computer Diagnostic.
8. Boot Computer to Safe Mode.

What is UEFI mode?

The Unified Extensible Firmware Interface (UEFI) is a publicly available specification that defines a software interface between an operating system and platform firmware. UEFI can support remote diagnostics and repair of computers, even with no operating system installed.

How do I open BIOS on Windows 10?

How do I force BIOS?

In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.

How can I find my BIOS version?

Finding the BIOS Version on Windows Computers Using the BIOS Menu

1. Restart the computer.
2. Open the BIOS menu. As the computer reboots, press F2, F10, F12, or Del to enter the computer BIOS menu.
3. Find the BIOS version. In the BIOS menu, look for BIOS Revision, BIOS Version, or Firmware Version.

How do you get into Windows 8 if you forgot your password?

If you’ve forgotten your Windows 8.1 password, there are several ways to retrieve or reset it:

1. If your PC is on a domain, your system administrator must reset your password.
2. If you’re using a Microsoft account, you can reset your password online.
3. If you’re using a local account, use your password hint as a reminder.

Why my Windows 8 is not opening?

Reset the BIOS to Default Values If your computer is set to first attempt to boot to another device, this may cause issues with successfully booting to Windows. To reset your computer’s BIOS to factory defaults, perform the following steps: Restart the computer.

Where is the BIOS located in Windows 8?

Instead, in Windows 8, the BIOS is accessed through the Settings tab on the home screen. The new and improved boot menu also lets you boot from different devices, into a different operating system, or mess around with settings like you’ve always done. To get into the BIOS, open Settings, then select General.

How to access UEFI BIOS setup in Windows 8?

How to Access UEFI BIOS Setup in Windows 8/10 New PCs UEFI (Unified Extensible Firmware Interface) is a standard firmware interface for new PCs pre-installed with Windows 8/10, which is designed to replace BIOS (basic input/output system).

How to update BIOS software on Windows 10?

1 Type “Command Prompt” into the system’s search bar at the bottom left of your screen and click on the Command Prompt… 2 In the window, type “wmic bios get serialnumber” and press “Enter.” More

Where do I enter BIOS serial number on Windows 10?

1. Type “Command Prompt” into the system’s search bar at the bottom left of your screen and click on the Command Prompt Desktop App. 2. In the window, type “wmic bios get serialnumber” and press “Enter.” After you have entered the serial number on the product identification page, choose your operating system as “Windows 10.”