Guidelines

How do I root my Motorola Droid X?

by Rhyley Bryan

How do I root my Motorola Droid X?

Instructions

  1. Begin by downloading and installing the Motorola USB drivers to your computer.
  2. Download and save the Droid 3 easy root script files to your computer.
  3. Turn on USB debugging on your phone.
  4. Connect your phone to your computer using a USB cable.
  5. Open the folder where you extracted the rooting files.

How do I boot my Droid X into recovery?

Boot your Motorola Droid X into recovery mode

  1. Turn your phone off.
  2. Hold down “Home” and press the “Power” button there at the top.
  3. Release the “Power” button, but continue to hold the “Home” button until you see an exclamation mark (!)
  4. Release the “Home” button and press the “Search” key once (and only once!)

How do I bypass the activation screen on a Droid X?

Bypassing Activation Screen on Droid X

  1. Begin by touching the upper left hand corner of the screen.
  2. Then touch the upper right hand corner.
  3. Then touch the lower right hand corner (above the gray bar)
  4. Then finally touch the lower left hand corner (above the gray bar)

How do I bypass the activation screen on my Motorola Android phone?

I. Bypass the Activation Screen on a Droid Phone – Tap the bottom left corner of the screen ( just above the grey bar along the bottom with emergency dial and change language in it). 6. That’s it, should pop up the home screen shortly, if not retry.

How do I activate my Motorola phone without a SIM card?

1 Answer

  1. Load Boot menu by holding the Volume Down button while starting the phone.
  2. Press the Volume Down button until the option “Boot Android (NO BP)” appears at the top of the screen.
  3. Press the Volume Up button to select this option.
  4. On load, the phone will bypass the No SIM card screen.

How do I permanently delete mobile data?

Go to Settings > Backup & reset. Tap Factory data reset. On the next screen, tick the box marked Erase phone data. You can also choose to remove data from the memory card on some phones – so be careful what button you tap on.

How do I clear data on my Motorola phone?

To clear the mobile browser cache, follow these steps:

  1. From the Home screen, tap Apps.
  2. Tap Chrome.
  3. Tap Menu at the top right.
  4. Tap Settings.
  5. Tap Privacy.
  6. Tap Clear Browsing Data.
  7. Tap Cache.

Can you use a Motorola phone without a sim card?

The short answer, yes. Your Android smartphone will totally work without a SIM card. In fact, you can do almost everything you can do with it right now, without paying a carrier anything or using a SIM card. All you need is Wi-Fi (internet access), a few different apps, and a device to use.

How do you permanently erase data so that it Cannot be recovered?

Go to Settings > Security > Advanced and tap Encryption & credentials. Select Encrypt phone if the option isn’t already enabled. Next, go to Settings > System > Advanced and tap Reset options. Select Erase all data (factory reset) and press Delete all data.

How to root an Android phone from Motorola?

Pick the “UPDATE-SuperSU-v1.41.zip” file and flash the same. When the installation procedure ends, from recovery select “+++go back+++” and “reboot system now”. Unplug the USB cable as you are done, your Android based Motorola handset has been successfully rooted.

How to restore warranty on a Motorola phone?

Furthermore, if you get pass through the root method, then you can restore the warranty (if you will have to) by following some easy to apply procedures: you will have to downgrade your Motorola devices to stock Android firmware, or you will have to update your devices with an official release of the Android software.

Is it safe to root an Android phone?

Most of the Android users are thinking in rooting their devices, but when hearing about the warranty aspect, they are changing their minds. As you know the root operation isn’t official, so the warranty of your phone will get void. That’s what scares most of the Android users.

How can I connect my Motorola phone to my computer?

Connect your Motorola device with the computer by using its USB cable. Go to the fastboot folder, and open a command prompt window there: press the shift key on the keyboard and while pressing the same right click on a blank location with your mouse; then select “open command prompt window here”.

https://www.youtube.com/watch?v=ERBGYXN_odo