How long do Spicer U-joints last?

Extended lubrication u-joints. or 6 months or 6 months or 6 months or 6 months Once greased, this relubrication (whichever (whichever (whichever (whichever interval must be followed.

What size u joint do I need?

For most cars, 1310-series U-joints are typical choice, but for performance applications, the rugged 1350-series joints are the better choice. The larger the series number, the larger the trunnion. Trunnions are the protruding shafts that the caps ride over. Larger trunnions equate to more torsional strength.

What are the 3 common symptoms of a bad U joint?

Signs of a Bad U-Joint

• Clunking or Clanging. Your vehicle’s U-joint may eventually wear at connecting points to the drive-shaft.
• Vibrations. If your driveshaft is out of balance, it’s often because of a defective universal joint.
• Grinding or Chirping.
• Loud Banging.

Are Spicer u-joints better than MOOG?

Frankly, there’s a very simple answer: If you drive a Jeep, I recommend you to go for Spicer joints. This specific U joint is the absolute best replacement part you can get for virtually all Jeep models. For most other vehicles – and especially light trucks or commuter cars, MOOG are an affordable and optimal solution.

How often should I change my u-joints?

every 5,000 miles
In most cases, you have to grease your u-joints every 5,000 miles or so. When you fail to service your u-joints on a regular basis, they will fail. You don’t have to worry about this problem with maintenance free u-joints. Misalignment: This happens when you change the vehicle’s ride height.

What is the difference between 1330 and 1350 u-joint?

Take note that the u-joint is only as strong as the smallest series number. The 1330 to 1350 U Joint cross width is 3.625 (3 5/8”) on both sides, while the cap diameters are different. 1 1/16″ on the 1330 side and 1 3/16″ on the 1350 side.

What is a 1310 u-joint?

1310 U-Joint Series is the most common U-Joint ever used. It is still used on OE applications. 1.062 cap and 3.219 width. ( 1 1/16 x 3 1/4 close) 1330 U-Joint Series is very common and used on OE production.

What is the difference between a 1310 and 1330 U-joint?

1330 joints use a larger body than the 1310 joint but the same-size trunnions and caps. They are often found in 3⁄4-ton trucks and allow more angularity than 1310 joints but are only marginally stronger. 1350 joints are found in 1-ton trucks and use the wider body of the 1330 joint but with larger trunnions and caps.

What is the difference between a 1310 and 1350 U-joint?

Size comparison between the 1310, 1350, and 1410 series U-joints. “A 1350 series joint is a bigger stronger joint,” Woods explained. The 1350 U-joint is rated for 2,200 lb-ft (minimum elastic limit) of torque. While the 1310 series, the stock size for most Jeeps, is rated for 1,600 lb-ft of torque.”

How do you check for a bad u-joint?

If a u-joint is excessively worn, there’s an easy test you can perform. With your foot on the brake, shift the car into reverse. Then, shift into drive. If the vehicle makes a clunking sound, or you can feel it knock one time after engagement, a u-joint is likely the culprit.

How far can you drive on a bad u-joint?

A car with a bad U-joint will break down in a few hundred miles at the maximum. But if you have a bad U-joint and you are having a transmission fluid leakage, you should not drive your car since the U-joint may break down anytime and will cause damage to the brake line, drive shaft, transmission line and other parts.

When was the first Spicer U-joint kit made?

Spicer U-joint Kit, 1350 Series. Spicer parts are engineered to ensure longer life for vehicles in a wide variety of applications. That’s because Spicer parts are manufactured to the exact standards and specifications as Original Equipment parts. Spicer Invented the First U-Joint in 1904, and Spicer Still Offers Reliable Quality.

Which is Spicer blue coated performance U-joint?

Spicer ® Blue-Coated Performance U-Joints Spicer U-Joint Blue U-Joint Equivalent 5-760X 5-760XC 5-7166X SPL30-7166XC 5-1350X SPL30-1350XC SPL55-3X SPL55-1480XC

What makes Spicer Life series U-joints so good?

Spicer Life Series ® Plus U-Joints Global manufacturers already recognize Spicer Life Series (SPL ®) u-joints as a benchmark in quality. We took this trusted OE product and enhanced the grease, then improved the seal, spacer, and seal guard materials, to create u-joints with unrivaled performance and longevity: Spicer Life Series Plus u-joints.

When did Clarence Spicer invent the universal joint?

Ever since Clarence Spicer invented the first universal joint in 1904, the Spicer name has been synonymous with quality and performance. Today, Spicer u-joints incorporate advancements in design, materials, and manufacturing processes to deliver a consistent, high-quality product that is engineered to meet the specific demands of the application.