Why does the upper thread keep breaking?

The upper thread tension could be set too tight. Set the tension to the best thread tension setting or less. Make sure the spool of thread is installed correctly using the correct size spool cap for the size of spool. Check that the bobbin is wound so that it about 80% full and that the thread is evenly wound.

Why does my embroidery machine keep breaking thread?

Make sure to have your embroidery machine tensions set properly. Having the tension too high pulls too tight on your thread, leading it to break. Test and adjust the tension on your machine regularly and as needed. Machine your machine for burrs, or any knicks or scratches on any of the metal parts of the machine.

What is the remedy when the upper thread breaks?

Adjust the tension disc. Replace blunt or bent needles. Use appropriate thread for the needle size. Clean the bobbin case and shuttle.

Why does the upper thread keep breaking on my sewing machine?

There could be several reasons why the upper thread keeps breaking. The upper thread could be installed incorrectly. Rethread the machine according to the instructions. For details, refer to “Upper threading”. The upper thread tension could be set too tight. Set the tension to the best thread tension setting or less.

What’s the best way to finish upper threading?

* Rotate your right hand slightly to check that the thread is engaged. While gently holding the thread, raise the needle threader lever. Pull the thread towards the rear to finish the upper threading. The needle threader lever can only be used with home sewing machine needles size 75/11 – 100/16.

What should I do if my thread keeps breaking?

Adjust the lower thread tension. The bobbin thread is not wound correctly. Check that the bobbin is wound so that it about 80% full and that the thread is evenly wound. If the bobbin is not correctly wound, rewind the bobbin.

Why does the upper thread keep breaking on my computer?

The upper thread could be installed incorrectly. Rethread the machine according to the instructions. For details, refer to ” Upper threading “. The upper thread tension could be set too tight. Set the tension to the best thread tension setting or less.