Is a Mercury Black Max a good engine?

The 2.0 liter 150 carbed Black Max is a workhorse, reliable and easy to maintain. Only considered thirsty when compared to modern DFI technology. I have had a 1986 150-HP for over 7 years, one switchbox and a stator besides normal care.

How many hours can you put on a Mercury outboard?

Mercury motors claim to last thousands of miles, but like all other motors, this depends on the care, maintenance, and use. With the proper care and cleaning, Mercury outboard motors could offer you over 2,000 or even 3,000 hours of use.

How fast does a 150 mercury go?

With a 150-hp Mercury Four Stroke turning a 15.6×13 pitch Enertia prop, we reached our top speed of 35.1 mph at 6000 rpm. Best cruise came in at 3000 rpm and 14.3 mph.

What years did Mercury make the Black Max 150?

1975. In 1975, Mercury (175 hp) and OMC (200 hp) debut the first V-6 outboards. Mercury’s is nicknamed the “Black Max.” In 1975, Mercury (175 hp) and OMC (200 hp) debut the first V-6 outboards.

How much does a Mercury Black Max 150 weight?

385 lbs. A manual is a cheap investment.

How much does a Mercury Black Max 175 weigh?

Weight – 395 lbs.

Is 500 hours a lot for an outboard motor?

In the Midwest, 500 hours is “high,” even though it isn’t. I wouldn’t bat an eye buying a motor with 1,000 hrs…. but the price should reflect it’s use, because the next guy won’t pay top dollar for it either. Big 4 strokes are good for 5,000 to 6,000 hours.

How many hours on an outboard is too many?

A typical estimate from the industry is that an outboards motor last around 1,500 hours of operation. Assuming the average owner uses their boat 200 hours a year, this would mean that the motor would last between seven and eight years.

How fast can a 150 hp outboard motor go?

A single 115 to 150-hp engine can produce a reasonable performance for an entry-level fiberglass sportboat from 17′-19′, depending on the load. With it, a powerboat in this range can have a top speed from 40 to 45 mph, with cruising speeds in the mid-20s.

What year did Mercury outboards go to fuel injection?

1996
In 1957, Mercury’s jet prop, through the propeller hub underwater exhaust, was introduced to the industry. To reduce emissions and make two-stroke outboards more efficient, Mercury was the first to introduce Direct Fuel Injection in 1996.

How much does a Mercury 150 2 stroke weight?

150hp to 250hp

How big is a Mercury Black Max 150?

If its a plain ole 150 it is a 2.0 liter, Xr6 is a 2.5, and Xr4 is a 2.4 liter. You are correct its just burning more fuel with no gain.The running rich at idle could be clogged bleed restrictors or idle jets/needles been messed with. Click to expand… what years were the diferant motors made? Re: Mercury Black Max 150 to 175 conversion?

Is the Mercury Black Max still riding good?

The boat has its age but it still rides good, specially in shoppy water because of this kind of heavy build tech. from the 90’s, the oil injected system has been removed and it is necessary to mix oil when tanking. Accesories as life jackets, fenders, ropes, cushions are included.

Is the Mercury 150 Max low under load?

Yes its very low when under a load. It will reach much higher rpm when prop is disingauged. All the work was done by a repair shop but I have checked the compression my self aswell. Timing was adjusted after replacing the stator and the trigger was checked and is advancing the timing.

What kind of boat is the Black Max?

150 Mercury Black Max Boats for sale 1993 Mercury 150 Black Max Engine and Engine Accessories 18′ Robalo Center Console – Mercury 150 Black Max with trailer 1987 21FT SWITZER SPEED/ SKI BOAT 150HP MERCURY BLACK MAX RARE BOAT 150 hp mercury black max runs good controls and electric included 2015 South Bay 524 CPTR (Black-w/Mercury Pre-Rig)