How do I take my ice maker apart?

How to Remove an Icemaker

1. Step 1: Disconnect the Power.
2. Step 2: Turn Off the Water.
3. Step 3: Remove the Ice Bucket.
4. Step 1: Remove the Panel Cover.
5. Step 2: Release the Ice Maker.
6. Step 3: Disconnect the Wires.
7. Step 4: Remove the Brackets.

How do I clean my Whirlpool freezer ice maker?

How to Clean a Whirlpool Ice Maker

1. Remove the ice maker bin and wash it in warm, soapy water.
2. Dampen a cloth or paper towel with the same bleach solution and wipe down the ice maker in the freezer.
3. Wipe the ice maker unit with a dry cloth to make sure no moisture remains.

Where is the reset button on a Whirlpool refrigerator ice maker?

Press the Reset Button

1. At the bottom of the ice maker.
2. Above the ice tray.
3. Underneath the ice tray.

Why is my Whirlpool ice maker not working?

In other instances, your a Whirlpool ice maker not making ice may be due to insufficient water supply. A clogged water filter, kinked water line hose, or defective water inlet valve can restrict the water flowing to an ice maker. Schedule a professional repair to replace a defective water inlet valve.

How do I force my ice maker to cycle?

How to Force an Ice Maker to Cycle

1. Open the freezer door to remove the ice bin from below the ice maker.
2. Empty the ice from the bin.
3. Press the ice maker toggle switch to the “On” setting if it is not already activated.
4. Pop off the front cover of the ice maker with the tip of a flat-blade screwdriver.

How long is the cleaning cycle on a Whirlpool ice maker?

Whirlpool models generally have a cleaning cycle time of 70 minutes. Remove the drain cap and note if there is any cleaning solution in the interior. If there is, run the cleaning cycle again using just water. If no cleaning solution drains out of the ice maker, replace the drain cap.

Why does my ice maker fill tube freezing up?

The ice maker fill tube can be accessed from the back of the refrigerator depending on the model. A refrigerator ice maker that freezes up can be caused by a frozen ice maker fill tube, faulty water inlet valve, too low freezer temperature setting, or a water filter that needs replacing.

How do you unfreeze an ice maker fill tube?

Apply heat with a hairdryer to the ice maker fill tube, which is usually a white, rubber-like hose. Hold the nozzle of the hairdryer at the front of the ice maker so that the heat will blast into the fill line. Set the hairdryer to its lowest heat setting to avoid melting the plastic lines and parts of the ice maker.

Why is my Whirlpool refrigerator not making ice?

A Whirlpool refrigerator not making ice may come down to incorrect temperature settings. For proper ice production, the freezer should be set between 0-5°F. If the temperature is too warm, ice may not adequately freeze and can appear smaller or misshapen.