Articles

How do I fix my Canon MP287?

by Rhyley Bryan

How do I fix my Canon MP287?

Entering Service Mode

  1. Turn the printer off (ON/OFF)
  2. Press and hold the STOP/RESET.
  3. Press the Power ON/OFF.
  4. Remove the STOP/RESET (Note: power ON/OFF is still on hold.
  5. Press the STOP/RESET 6x and release the STOP/RESET and Power ON/OFF.
  6. The entered the Service Mode, all LED will stop blinking.

How do I download canon tool?

Download Canon Service Tool V3400 for maintenance and reset

  1. Download Canon Service Tool V3400.
  2. Set the printer to Service Mode.
  3. Run the Service Tool V3400.exe program.
  4. Select the connected USB port number from the USB PORT.

Where are error codes printed on MP driver?

– Messages during printing from a computer are displayed on the MP driver Status Monitor. – Error codes are printed in the “operator call/service call error record” area in EEPROM information print. Buttons valid when an operator call error occurs: – ON button: To turn the machine off and on again. – OK button: To clear and recover from an error.

How do I install a canon mp287 printer?

You will need to connect to your printer with a USB cable and run the installation CD (don’t connect the USB cable to the printer until your are prompted to do so on the installation CD). One you have connected to the Printer via USB the PC should detect the Canon PIXMA MP287 printer. You can then proceed with the installation process.

What to do when you get an error code on a canon mp280?

Replace the ink absorber, and reset the ink absorber counter. Pressing the Stop/Reset button will exit the error, and enable printing without replacing the ink absorber. However, when the ink absorber becomes full, no further printing can be performed unless the applicable ink absorber is replaced. 7-seg. LCD

What does error code E50 mean on Canon printer?

E50: Scanning the Print Head alignment sheet has failed. To remove the error, press STOP/RESET. Make sure that loaded paper (A4 or letter sized) is suitable for automatic print head alignment, in the correct position and orientation in the platen glass and paper and platen glass are not dirty.