What batteries does roboguard use?

Roboguard uses eight C-size batteries (torch batteries) that will last three to five years although some have lasted up to 8 years. The HQ will alert you when the batteries need replacing by flashing the trouble light.

How do I change the battery in my roboguard?

1. Remove batteries.
2. Choose suitable “ring” on back of Roboguard (normally one up from centre) 2 outer rings cannot be used. Drill out with 5,5mm drill bit.
3. Place “head” of bolt inside battery housing and secure to bracket with nut on outside.
4. Replace batteries.

How do I remove roboguard from HQ?

To Remove a Roboguard from a Zone: Enter program mode A or B, select the Zone to be removed and press the Status button. Note: When re-setting a Zone that has been triggered in Mode B the HQ will emit a short low-tone bark. This allows you to hear the difference between a Mode A trigger and a Mode B trigger.

How do I add roboguard to HQ?

To program the next Roboguard, press and hold the HQ Tamper Button until you hear a beep. The Tamper light will burn solid red and the previously programmed Roboguard Zone (s) will burn solid green. Press and release the desired Zone button on the HQ, it will burn solid green and the other green lights will turn off.

What kind of batteries do you need for a roboguard?

Original Roboguard replacement batteries for your Roboguard detector. Kinetic Alkaline batteries is specifically designed for the sensors. Do not use alternative cheaper batteries as they might leak or or underperform over time Price is as per image – 2 x battery. Roboguard beam requires 4 sets total No Product Questions yet.

How does the roboguard outdoor security system work?

The roboguard is a stand alone, wireless automatic outdoor intruder security system using passive infrared sensor beams that detect movement up to 20 meters away in an 110° arc. Each guard has two sensors one on top and one at the bottom, each emitting 11 beams, a top and bottom beam have to be broken within half a second to trigger an alert.

How many beams does a roboguard Guard have?

Each guard has two sensors one on top and one at the bottom, each emitting 11 beams, a top and bottom beam have to be broken within half a second to trigger an alert. This effectively eliminates false alarms caused by dogs, birds and plants.

Who are the distributors of roboguard electric fence?

Ndlovu Fencing (Pty) Ltd, trading as Stafix Electric Fence and Security Centres is proud of being exclusive distributors of the Roboguard product range. Contact Us Welcome to the Home of Roboguard (Official Website)