What do you do when your promethean board says no signal?

When you turn on the Promethean board and you see the “NO SIGNAL” error across the screen, you just need to change the input channel. If neither of these solutions work, unplug both the little grey box (jack labeled DC 5V) and the screen from the wall and plug them both back in.

How do I get my promethean board to work?

Connect the Blue VGA cable coming from the back of the board. Connect the USB cable into an available USB port on your computer. Toggle the Screen. o Press Fn + F2 on the Methods laptops or Fn + F8 on the Dell laptops to get the image on the laptop desktop to project on both the laptop and the board.

What does red flame mean on promethean board?

RedFlame — If the flame on the promethean board is red, this indicates that the board and computer are not communicating. Make sure all USB cables from the promethean board and the ActiView are pushed tightly into the computer.

How do you reset the pen on a promethean board?

From the Taskbar, right-click on the ActivInspire icon. On the shortcut menu that appears, click on Calibration. Then click on 5 Points (Quick). This will bring up the calibration screen so that you can calibrate the pen.

What is the color of the flame on the promethean board?

The flame on the Activboard changes colors to communicate various messages. If the flame is white, your Activboard is operating correctly. If the flame is red, purple, or blue, unplug the board and restart.

What to do if your promethean board is not working?

• Ensure the board is connected to the computer via the USB cord • Ensure the board is plugged into an electrical outlet or has power (flame illuminated) • Try another ActivPen. If that works, it could be the nib. Replace the nib in the pen that does not work. 2. The pen is skipping, dragging or acting strange when writing. • Try another pen.

How do you calibrate a Promethean circuit board?

You can calibrate the board in one of two ways: Right click one time on the Activboard icon in the System Tray in the bottom right-hand corner of the computer screen. Click on “Calibrate” Hover the Activpen over the lighted icon (the flame) on the top left corner of the Activboard.

What does jumping mean on a promethean board?

When the cursor jumps to random locations on the board this is an indication of a term Promethean calls “jumping.” Power the board off and on again. Touch the pen to the board. If the problem persists, attempt to use a different computer. If the problem continues, then the problem is software related.