When should I replace Kidde KN-COEG-3?

Replace CO Alarms Every 10 Years When your alarm nears its end of life, it will let you know by beeping 2 times every 30 seconds. Knowing how to identify these sounds and what they mean is essential to keeping your home safe.

Does Kidde Nighthawk detect natural gas?

Description. The Kidde KN-COEG-3 AC powered, plug-in CO and explosive gas alarm protects you and your family from two deadly threats. The gas sensor is a metal oxide sensor designed to detect natural gas (methane) or propane.

What does it mean when the carbon monoxide alarm beeps 3 times?

MALFUNCTION
Three beeps, at 15-minute intervals = MALFUNCTION. The unit is malfunctioning. Five beeps, at 15-minute intervals = END OF LIFE. The alarm has reached the end of its useful life and you must install a new one.

What does PCO mean on a carbon monoxide detector?

PCO is an indication that at some point the unit read carbon monoxide in excess of 100 ppm. This was not a sustained level or the unit would have sounded. Clear this by holding down the peak level and test button at the same time for 5 seconds.

Is the Kidde kn-coeg-3 plug in Co and explosive alarm?

The Kidde KN-COEG-3 AC powered, plug-in CO and explosive gas alarm protects you and your family from two deadly threats. The KN-COEG-3 includes 9V battery back up that provides protection during a power outage, when AC-only units can not provide protection.

What is the UPC number on the Kidde kn coeg 3?

Consumer Benefits Part Number: 900-0113 Model: KN-COEG-3 UPC Number: 7-84908-01130-5 Power Source: 120VAC Sensor: Electrochemical

What does the red dot on the Kidde kn-coeg mean?

The display will identify “GAS” if gas is present. The display will have a red dot in the lower right corner that will blink to indicate the normal operation. The alarm shall include a test button that will electronically simulate the presence of CO or GAS and cause the unit to go into alarm.

What is the unit number of a Kidde carbon monoxide alarm?

Repeat with a number showing in the display (CO concentration in ppm). Gas – One second of alarm on, one second of alarm off, repeating with “GAS” shown in display. The carbon monoxide and explosive gas alarm shall be Kidde Unit Number KN-COEG-3 (part number 900-0113) or approved equal.