How do I reset my jawbone up?

Factory Reset for Headsets

1. Turn OFF your headset.
2. Turn OFF or disable Bluetooth on all paired devices.
3. Turn ON your headset.
4. Wait for LED to blink white.
5. Press the TALK button 6 times in quick succession.
6. The LED will turn solid red for approximately 6 seconds.

How do I reset my Jawbone 2?

Resetting the Jambox

1. Make sure your Jambox is off (like in the picture above)
2. Make sure your Jambox is NOT plugged in.
3. Press and hold the big round button on the top of the speaker.
4. While you’re still holding, plug the Jambox into a power source.
5. It should light up immediately.

How can I soft reset my Jawbone UP?

Soft Reset Jawbone Up. To do a soft reset of the Jawbone Up, you will have to do the following steps. Connect the 3.5mm pin of Jawbone up to the USB cable, and the plug the USB cable into a USB port of your computer or a working charging USB port.

How do I connect my Jawbone Up to my computer?

Connect the 3.5mm pin of Jawbone up to the USB cable, and the plug the USB cable into a USB port of your computer or a working charging USB port. Now press and hold the button of the Jawbone up in your hand. Continue pressing the button while you plug the band into the USB cable.

How to reset the JAMBOX on Jawbone speaker?

1 Make sure your Jambox is off (like in the picture above) 2 Make sure your Jambox is NOT plugged in 3 Press and hold the big round button on the top of the speaker 4 While you’re still holding, plug the Jambox into a power source 5 It should light up immediately

What to do if your Jawbone Icon wont turn on?

If you have a Jawbone Icon and it won’t “turn on” — a reset may be your answer, too. Here’s what to do: Illustrations follow the step-by-step instructions. Disconnect the Jawbone Icon from any power source.