What size tires go on a 2002 Toyota Tundra?
What size tires go on a 2002 Toyota Tundra?
For the conditions where I live these tires are ideal. When I drive down the highway in the mornings I’m not throwing rocks at everyone because the highways were sanded. Great tire for someone on a tight budget…
How big of tires can I fit on my tundra?
So, What is the Biggest Tire You Can Put on a Stock Toyota Tundra? The biggest tires you can put on a stock Toyota Tundra without a lift kit is 275/70 R16 on 16-inch rims on the first generation of the Tundra. On 17-inch rims, you can fit 265/70 R17 or 275/65 R17.
What lug pattern is a 2002 Toyota Tundra?
Toyota – Vehicle Bolt Pattern Reference
| YEAR | MAKE | COMMENTS |
|---|---|---|
| 2001 | Toyota | 6 lug 5.5 inch or 139.7mm Medium Offset |
| 2002 | Toyota | 6 lug 5.5 inch or 139.7mm Medium Offset |
| 2003 | Toyota | 6 lug 5.5 inch or 139.7mm Medium Offset |
| 2004 | Toyota | 6 lug 5.5 inch or 139.7mm Medium Offset |
Will 285 55r20 fit Stock tundra?
chphilo Tundra addict. 285/55/20 is slightly smaller than 285/65/18, which is not that much larger than stock tires (less than 1/2 inch taller, I think). You should not have difficulty fitting that to stock Tundras. Even with 25 mm offset wheels, it shouldn’t be an issue.
What’s the Max tire size for a tundra?
Max tire sizes are: 18″ rims: 275/70 R18 – One inch taller but same width as factory. 18″ rims: 285/70 R18 – 4/10ths wider and 1.7 inches taller than factory. Trimming may be necessary.
How to calculate the offset on a tundra wheel?
Second – convert the offset which is in millimeters into inches. There is 25.4mm in 1 inch so divide the offset by 25.4. Lastly – add the converted offset to the wheels center line if the offset is positive for the correct backspacing. Subtract the converted offset to the wheels center line if the offset is negative for the correct backspacing.
What is the backspacing of a tundra wheel?
Backspacing is the measurement from the hub mounting surface to the back edge of the wheel. Typically the higher the offset/backspace, the more the wheel will tuck inwards towards the suspension or away from the fender. The lower the offset/backspace, the more the wheel will push out away from the suspension or towards the fender.
What’s the bolt pattern on a tundra wheel?
Bolt Circle – The diameter of an imaginary circle drawn through the center of each lug hole. Also referred to as the bolt pattern. Center Bore – The hole in the center of the wheel machined to match the hub of specified vehicles with hub-centric wheels and machined to a generic size with lug centric wheels.