Are all hoses for washers the same?

There are two hoses that go from the back of the washing machine to the water supply valves. 34 inches is the diameter of the hot and cold hoses. The hoses are marked to distinguish them. There are hoses that can be used for both hot and cold water.

Do high efficiency washers need special hoses?

The hoses improve efficiency on traditional washing machines and are required for high efficiency washing machines for best performance. EASTMAN certified appliance connectors are premium quality products that provide a reliable installation every time.

How long do rubber washing machine hoses last?

5 years
We recommend that you replace your washing machine hoses every 5 years or anytime you notice any of the signs above. Rubber washing machine hoses should be replaced with stainless steel braided hoses. They are much more resistant to bursting and are fairly inexpensive compared to the potential cost of a flood.

How long do stainless steel braided hoses last?

Study recommends replacing stainless steel braided hoses and rubber hoses every 5-7 years. The most common place where a washing machine hose leaks or breaks is the connector.

What is the best washing machine hose?

Stainless steel washing machine hoses are the most durable hoses available. These hoses are made from braided stainless steel meshing, which makes them strong and durable. Even though these hoses are much stronger than other types, they can also crimp on tight corners, which can cause premature water burst.

What is the maximum length for a washing machine drain hose?

The drain hose does have a limit. The recommended maximum length for the drain hose is 12 feet. If your drain line needs to be 18 feet there may be a problem.

Where is the drain hose on a washing machine?

The drain hose is usually found on the back of the washer, along with two separate hoses for both cold and hot water supply. The drain hose carries wastewater out of the machine, while the hot and cold water supply hoses bring clean water in.

What size drain hose for washing machine?

The drain hose for most washing machines is usually between 1 and 1 1/2 inches wide. A gooseneck at the end slips into the top of the drain standpipe.