How do I fix the code B200 on my canon printer?

How to Fix the Canon B200 Error

1. Reset the printer.
2. Remove any obstructions.
3. Clean the printer head.
4. Manually clean the print head.
5. Remove old ink.
6. Re-install the printer drivers.
7. Try a new ink cartridge.
8. If none of the above methods work, then the B200 error is probably accurate.

How do I clear a canon printer error?

Reset the Canon printer

1. Switch on the printer.
2. Press and hold the Stop/reset button.
3. Press the button that you use to make a color copy and hold it down.
4. Wait 5 seconds.
5. The printer now reboots and sets itself up.
6. Does the printer indicate that the device needs to be calibrated?
7. You’ve reset your printer.

Why am I getting an error message on my canon printer?

Canon printers produce error codes for one of several reasons: The settings for your printer might not be compatible with the document you’re trying to print. The loading bay for your paper might have become lodged with paper or you’re using the wrong type of paper.

How to fix a Canon printer error B200?

Fixing a Printer Error B200 on 4-Color Ink Canon Printers Step # 1.. Open the Ink Cartridge Carriage and uninstall each Ink Cartridge from its stot. Carefully take out the Print… Step # 2.. Wipe off any congested and dried ink on the Print Head using a clean, lint-free cloth damped in warm water.

What should I do if I get an error on my Canon printer?

Place the print head back in and lock the lever down. 6. Place all of the ink tanks back in the printer. 7. Close the cover and turn the printer off. 8. Unplug the power from the printer. Leave the power unplugged for about 5-10 minutes. If the error continues to persist, please contact our support group using the “Contact Us” link below.

What to use to clean canon B200 print head?

Manually clean the print head. Use either pure alcohol or a non-oil-based cleaner on the print head’s gold contacts. Use a microfiber cloth to rub the cleaner onto the contacts, then let it dry completely before reconnecting. The print head is very fragile, so handle it with care. Remove old ink.

Why do I get the B200 error Agin?

After 20 or 30 pages, I got the B200 error agin. I repeated the steps, and it worked fine. I have no idea which one of these seemingly useless steps was actually the thing that made it work, but that is what I did, and this little process made it work. I probably need to look at replacing my MX922, since it’s maybe five years old.