How do I replace my DStv remote?

Please take it to your nearest MultiChoice Service Centre or Agency together with your proof of purchase. If your remote is older than 12 months, you can replace it at any MultiChoice Service Centre or Agency.

How do I reset my DStv a4 remote?

Reset DStv remote

1. Hold down both the ARC and Standby for about 3 seconds. During this step, the remote lights should change to amber.
2. Continue holding the ARC button as you release the Standby.
3. While you are still pressing the ARC button, dial 9499.
4. Now, release the ARC button to complete the reset process.

Are there different types of DStv remote controls?

Apparently, the different types of DStv decoders have varying remote controls. Although they are products of the same company, the RC of a particular decoder type/model may not be completely compatible with another decoder type. Therefore, you must take note of your decoder type before visiting a merchant store to purchase one.

How to change remote control settings on DSTV Explora?

 You must also ensure that the DStv Explora is set to respond to the mode that the remote is in when programming it. Example : if you have set the remote to mode 3, the DStv Explora must be set to respond to mode 3. To change remote control settings on the DStv Explora, press DStv, and go to System Settings in the Setting menu.

What does the DStv remote B5 model 5 do?

DStv Remote (B5 model) 5 Name Description STANDBYAllows you to quickly put the DStv HD Decoder into standby (or bring it out of standby). Quick tip:if you press and hold the STANDBYbutton, the DStv HD Decoder will reboot. TV GUIDEYour hotlink to the TV Guide with 8 full days of programming information, allowing you to easily plan your viewing.

How do I Set my DStv remote to TV2 mode?

If you observe a green coloured blink below the Back button, your controller is operating in TV2 mode. Setting your controller to work in TV2 mode is equally simple, and it involves pressing and holding the Back button for 3 seconds in a row.