What does a red X mean on ATT U-verse?

boot failure
A RED X on your TV screen caused by the U-verse receiver represents a boot failure, possible network issue, or hardware problem. It is recommended to check connections and attempt to power cycle the receiver by unplugging the power cord and plugging back in after 10 seconds.

How do I fix U-verse not available at this time?

Resetting U-Verse to resolve Availability Errors On your U-verse, hold the power button for 10-15 seconds. After this, you need to press the power button again so it will restart. On average, the duration for this entire process is about eight minutes. However, any ongoing recording will be interrupted.

Why do I get three dots on my U-verse TV screen?

If the lights on your U-verse receiver are blinking and no TV picture is displayed, your receiver is having trouble coming online. Unplug your receiver and wait five minutes, plug it back in, and then restart. Three dots displayed on screen. If you see three dots on your screen, it means your system is connecting.

Why does my U-verse TV have a red X on it?

For a more comprehensive list of error messages and other troubleshooting steps go to: A RED X on your TV screen caused by the U-verse receiver represents a boot failure, possible network issue, or hardware problem.

What to do when you get an error message on U-verse TV?

Try again. If you see a U-verse TV error message, use the AT Troubleshoot & Resolve tool to find a quick fix, or get some tips here. Restart your U-verse receiver (s) by holding down the POWER button for ten seconds, then pressing again to restart.

How long does it take to download from U-verse?

Most downloads finish in less than an hour. If you’re seeing the icon for more than an hour, unplug the receiver and wait five minutes, plug it back in, and then restart. If the lights on your U-verse receiver are blinking and no TV picture is displayed, your receiver is having trouble coming online.

https://www.youtube.com/watch?v=H-nzhYPykCw