How do I set up DStv extra view?

First, connect the coaxial cable of each decoder to the smart LNB. If you have recent or newer decoder models then use the uni-cable ports on the smart LNB. Otherwise, if you have old decoder models then you can use the universal port. Remember Explora decoders use the uni-cable ports.

How do I reset my HD PVR 2p?

HD PVR 2 Tuner

1. Press the TV guide button for about 5 seconds.
2. Press UHF then Play/Pause button, this will take you to a Green screen.
3. If you are prompted for a pin code, use 1649.
4. Reset the “Factory Default”
5. At times it will be necessary to also format the harddrive.

How do I fix my DStv parameters?

You can reset your DStv parameters to their initial point by resetting your decoder. All you need is your remote, and you can complete the reset successfully. Click on the menu button to bring up the settings menu. Navigate to the reset option and click on it.

How does DStv Extra view set up work?

How Does DStv Extra View Work? DSTV extra view work by connecting one or two “Secondary Decoders” to a “Primary Decoder” to enable the decoders to share a single DSTV subscription to increase the number of TV channels that can be viewed simultaneously. Only a maximum of two secondary decoders can be connected to a primary decoder.

Which is decoders are Xtraview capable DStv Extra view?

DStv Xtraview is a way of linking 2 to three decoders under a single subscription. You pay an additional R100 for each decoder in the extra view. All decoders can watch different channels at the same time. Which decoders are XtraView capable?

How to easily track DStv or any satellite?

Learn how to easily track DStv or any other satellite here. Next, replace the regular LNB with the smart LNB. Connect one cable to the uni-cableA and another to the uni-cableC. As shown above *Connect the A to the primary decoder and connect the C to the secondary decoder. Now enter the following settings for both decoders

How do I Set my DStv remote controller to work on primary decoder?

To set your DStv HD decoder remote controller to work on primary decoder or TV 1; press and hold the INFO button or i-button for at least 3 seconds. Alternatively, press until until a green light blinks repeatedly on the tiny aperture just below the INFO button. (see image above).