What do Les Paul push pull pots do?

A Push-Pull Pot can add a ton of versatility to your guitar! They are a great way to add a switch, or other cool mods without modifying your guitar too much. You can use them to reverse the phase, split a Humbucker, or trick your guitar out in a fresh way.

What are the best push pull pots?

6 Best Guitar Pots 2021 & Where To Buy Them

• Highly Rated. Seymour Duncan YJM-500 Hi-Speed Volume Electric Guitar Pot 500k.
• Full Kit. 920D Custom S5W-KIT 5-Way Wiring Kit for S-Style Guitars.
• Great Value. CTS 250K Short SOLID Shaft Audio Potentiometer/Pot – 450G Series – PAIR (2X)

What does a push pull tone control do?

Enter: the push-pull potentiometer (push-pull pot) — a way to dual-purpose controls already present on your guitar. The push-pull pot turns a simple volume or tone control into a volume-plus toggle switch, or a tone-plus toggle switch.

What does DPDT stand for in a push pull pot?

‘DPDT’ means the switch has two separate “poles”, or sides to it. If you’re not familiar with how pots work, we recommend going back to Part 1 and check out our article on pots here. There are two components of a Push-Pull Pot: the Pot and the Switch. Even though they look combined, they are actually separate.

What can you do with a push pull pot?

You can probably see where this is going; by using two different pots, you can make your guitar sound two different ways, opening your guitar up to different tonal and even functional possibilities. The most popular use of the push-pull pot is for coil splitting, and for good reason; it’s like having a Les Paul and a Strat in one guitar.

How does Lug 3 connect to the push pull pot?

When the Push-Pull Pot is down, Lug 3 and the Cap are both connected to Ground. They connect to ground via connecting to terminals C & E of the Push-Pull pot. When the switch is up, the ground lifts off of the tone pot and the volume pot. This allows your signal to connect directly to the output jack, with no Load.

Can you use two tone caps on a push pull pot?

This mod is pretty cool! With this mod, you can use two different tone caps with one push-pull pot. When pushed down, you can have to say, a .02mfd Cap, and when pulled up, you can have a Fralin Magic Cap, or vice-versa! The Signal enters the Pot at Lug 2. The Sweeper, Lug 2, is connected to one side of the switch, at point E.