What does encapsulation test fail mean?
What does encapsulation test fail mean?
Tech Support The encapsulation test will only be performed if the encapsulation type is ATM. When the encapsulation test runs it does an OAM ping Test. If it fails, that just means the DSLAM does not support the OAM ping test. If your internet is working, then I wouldn’t be concern about it showing as a fail.
What is encapsulation in modem?
From Wikipedia, the free encyclopedia. Multiprotocol Encapsulation over ATM is specified in RFC 2684. It defines two mechanisms for identifying the protocol carried in ATM Adaptation Layer 5 (AAL5) frames. It replaces RFC 1483, a standard data link access protocol supported by DSL modems.
What are the DNS servers for CenturyLink?
CenturyLink Domain Name Server (DNS)
| Service Type | Primary DNS | Secondary DNS |
|---|---|---|
| All Customers | 205.171.3.65 | 205.171.2.65 |
How do I change the DNS on my CenturyLink router?
CenturyLink ZyXEL C1100Z
- Access the router’s browser-based utility.
- Go to the “Advanced Setup” menu.
- Select the “WAN Settings” link from the left.
- Change your DNS type.
- Enter the first DNS resolver address.
- Enter the second DNS resolver address.
- Save your settings.
- Make sure your settings have been applied.
What can I do with my Zyxel c1100z modem?
The utilities menu gives you access to several additional tools to manage and test your modem. Advanced settings give you even more control over your modem’s configuration. Most of these are best for tech-savvy folks who are familiar with modems and networking. Was this article helpful?
What are the features of the Zyxel pk5000z router?
Product overview. The Zyxel PK5000Z modem/WiFi router has the following features and capabilities: ADSL and ADSL2+; 2.4 GHz b/g; Wireless 802.11b/g/n. Works with CenturyLink services at speeds up to 20 Mbps download/1 Mbps upload.
What’s the IP address for my Zyxel router?
Enter the PPPoE username and password credentials and save the settings. The most commonly used IP address for xDSL modem/routers is 192.168.1.x, this is also the IP address used by the ZyXEL routers LAN. This will create an IP conflict and internet traffic may not work.
What should I do if my Zyxel router cannot bridge my modem?
If the ISP cannot bridge or refuses to bridge the modem, change the ZyXEL routers LAN IP to clear any IP conflict between the modem/router and ZyXEL router. Open a web browser and access the router’s Web Interface (WebGUI).