How do I reset my Cisco access point password?

Steps to Recover Password on a Cisco 1242 Access Point?

1. Connect to the 1242’s Web interface by directing a Web browser to the access point’s IP address as decided during its setup.
2. Pull out the power cord from the 1242.
3. Locate the “Mode” button on the access point.

How do I reset my Cisco Aironet 1200 wireless access point?

Factory Reset via MODE Button Press and hold the MODE button while you reconnect power to the access point. Hold the MODE button until the Status LED turns amber (approximately 1 to 2 seconds), and release the button.

How do you reset an access point?

Press and hold the Reset button of your access point for 30 seconds. Once the access point is reset, perform a powercycle. Unplug the access point’s power cable and wait for 30 seconds then plug it back in. Wait for the access point’s lights to appear solid.

How to configure Cisco 1242 wireless access point?

Reconnect to the Web interface and again use the default username “Cisco” with the password “Cisco” to log in. Set up a new username and password, then reconfigure your access point. Performing the reset will wipe all settings from the 1242 access point, so only do it as a last resort. How to Configure Cisco 1242 Wireless AP?

How to reset Aironet 1242ag to factory settings?

After you reset to factory defaults, be prepared to give “Cisco” as both the username and password when you are prompted by either the GUI or the command-line interface (CLI). If the privileged command prompt ap# is available in the CLI, the write erase command and the reload command erase the startup configuration and reset the unit.

What is the password for the Cisco Aironet?

Cisco IOS Software-based APs have a default configuration that includes a username and password combination. Both the username and password are “Cisco”, which is case-sensitive. After you reset to factory defaults, be prepared to give “Cisco” as both the username and password when you are prompted by either the GUI or the CLI.

What are the features of the Cisco Aironet 1240ag?

Cisco Aironet 1240AG Series IEEE 802.11a/b/g access points deliver the versatility, high capacity, security, and enterprise-class features demanded by WLAN customers.