What is the proper way to use a fire extinguisher?

When operating a fire extinguisher, tell residents to remember the word PASS:

1. Pull the pin. Hold the extinguisher with the nozzle pointing away from you and release the locking mechanism.
2. Aim low. Point the extinguisher at the base of the fire.
3. Squeeze the lever slowly and evenly.
4. Sweep the nozzle from side-to-side.

How far should you stand back when using a fire extinguisher?

6 -8 feet
Stand 6 -8 feet away from the fire. Then, remember the word PASS: PULL the pin out to unlock the operating lever. AIM low: Point the extinguisher nozzle (or hose) at the base of the fire.

Can you use a fire extinguisher after you pull the pin?

Once the pin has been pulled and the trigger depressed, the canister can lose pressure, making the extinguisher useless in the case of a future emergency. Some experts recommend recharging, repinning and reusing a fire extinguisher just once, and then disposing of it according to local regulations.

What are the four steps for using a fire extinguisher?

There are four basic steps to using a fire extinguisher. Pull. Place the extinguisher on the floor. Hold it by the tank (pressure on the handle could pinch the pin). Pull the pin straight out. Aim. Start 10 feet back from the fire. Aim at the base of the fire.

Do you know how to properly use a fire extinguisher?

Part 3 of 3: Using a Fire Extinguisher Safely Get everybody out first. You shouldn’t try to tackle a fire on your own with a fire extinguisher unless you know everybody else is safely out of the building. Use a fire extinguisher for small, contained fires only. Fire extinguishers are not meant to fight large or growing fires. Evacuate a room that’s filled with smoke.

Using a Fire Extinguisher. To operate a fire extinguisher properly, use the acronym “PASS”. PULL: Pull the pin located at the top of the device, it is usually attached to a plastic or metal ring. The pin is there to prevent accidental discharge. AIM: Aim the nozzle toward the base of the fire, this is where the fire is fueled.

What is the pass method for fire extinguishers?

A simple fire extinguisher training technique to use with employees is the PASS method: Pull the pin on the extinguisher. Aim the hose nozzle low toward the base of the fire. Squeeze the handle to release the extinguishing agent. Sweep the nozzle from side to side at the base of the flames until extinguished.