How do I reset my Dlink router to factory settings?

How do I reset my router to factory default settings?

1. Step 1: With the router on, insert the end of a paper clip into the pinhole highlighted below.
2. Step 2: Hold the paper clip down for 10 seconds and release.
3. Step 3: The unit will reboot automatically. Once the WLAN light stops blinking, the unit has been reset.
4. Note:

How do I change my Dlink DIR-600 router password?

How do I change the login password to my DIR router?

1. Step 1: Open a web browser and enter the IP address of the router in the address bar (default is 192.168.
2. Step 2: The default username is admin and the password is blank (nothing).
3. Step 3: Click the Tools tab and then click Admin to the left.

How do I configure my router after resetting?

How to configure your Router after Reset?

1. Launch any of your favorite browsers.
2. Type in the address 192.168.0.1 in the address bar.
3. Enter the user name and password.
4. When you log in to the router for the first time, you will be prompted to change it.
5. Enter the Quick Setup option.

How to setup a D-Link Dir 600m router?

From the home screen select ‘ Setup’ Once you are done with the changes, click on ‘Apply changes’ button at the bottom and Restart the router. This completes your router setup. Now you can connect multiple devices to the router. Drop your queries in the comments, if you need any help. I run gizarena.com.

How do I Reset my D-Link router to factory settings?

Step 1: With the unit on, use the end of a paperclip to press the reset button, which is located inside a small hole on the rear of the unit. Step 2: Press and hold the reset button for more than ten seconds. The power light on the front of the router will turn off briefly to indicate that the unit is restarting.

How do I Reset my router to factory default settings?

Step 2: Press and hold the reset button for more than ten seconds. The power light on the front of the router will turn off briefly to indicate that the unit is restarting. Step 3: The unit will reboot automatically. Once the power light stops blinking, the unit has been reset and is ready to use.

What can I do with a D-Link router?

Friends, in this channel you will find the setup / configuration videos of networking / other devices. such as router, switch, range extender, outdoor AP, P2P bridging etc. Here you will find traditional non-traditional setup / configuration videos and some tips & tricks that will help you.